暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HP

HP 1TB 7.2K RPM 3Gb/s 2.5" SATA internal hard drive MM1000EBKAF

SKU CH-GTYR-WCACE

A 1 TB 2.5-inch SATA hard drive spinning at 7,200 RPM with a 3 Gb/s interface, supplied with a Smart Carrier caddy for hot-plug installation

  • 1 TB capacity for large storage needs
  • 7200 RPM speed for responsive data access
  • SATA 3Gb/s interface for broad compatibility
  • 5 inch form factor fits dense drive bays
  • Includes Smart Carrier caddy for tool-less installation

1TB 2.5" SATA HDD with smart carrier

This new HP internal hard drive delivers 1000GB of storage in a 2.5 inch form factor spinning at 7200 RPM over a SATA 3Gb/s interface. It ships with a smart carrier caddy included for quick installation in compatible bays.

Suits servers needing hot-plug 2.5" SATA bays

Builders whose chassis only accepts 3.5 inch drives or who require a 6Gb/s SATA link should look elsewhere. The 3Gb/s interface and 2.5 inch dimensions limit use to systems designed for this specific form factor and speed.

Interface is SATA 3Gb/s

The single specification that decides fit is the 3Gb/s SATA interface combined with the 2.5 inch hot-plug form factor; verify your backplane or controller supports this exact combination before purchase.

特長

  • 1 TB capacity for large storage needs
  • 7200 RPM speed for responsive data access
  • SATA 3Gb/s interface for broad compatibility
  • 5 inch form factor fits dense drive bays
  • Includes Smart Carrier caddy for tool-less installation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the SATA 3Gb/s interface limit the 7200 RPM drive’s real-world throughput?

The 3Gb/s SATA link sets the maximum data rate for this MM1000EBKAF drive, so sustained reads and writes cannot exceed that bus speed.

What physical space and mounting does the 2.5 inch HP drive with the included Smart Carrier caddy require?

It fits a standard 2.5 inch SATA bay and the supplied Smart Carrier tray secures it in HP server or storage chassis that accept that carrier.

How is the MM1000EBKAF installed in the Smart Carrier, and what step is often missed?

Slide the bare drive into the carrier until the connector seats, then lock the carrier handle; forgetting to latch the handle leaves the drive loose.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。