暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green HP PCI riser board assembly part 305442-001 for ProLiant DL320 G3 server

HP

HP 305442-001 PCI Riser Board Assembly for ProLiant DL320 G3

SKU CH-V9WJ-DJVDA

Adds PCI expansion slots to an HP ProLiant DL320 G3 server with this riser board assembly

  • TypeRiser Card
  • External USB PortsNo
  • Designed for HP ProLiant DL320 G3 servers
  • Adds PCI expansion slots to the chassis
  • Genuine HP part number 305442-001 ensures fit
  • Riser card form factor saves rack space
  • New condition guarantees reliable installation

PCI Riser Board for ProLiant DL320 G3

This HP 305442-001 riser board assembly adds PCI expansion slots to the ProLiant DL320 G3 server. It is designed for administrators who need to install additional add-on cards in that specific 1U chassis. The board connects directly to the system board to provide the required slot orientation.

Replaces Damaged or Missing Riser Assembly

This part replaces a failed or missing original riser board in the DL320 G3. The upgrade is worth it when the server requires more PCI cards than the base configuration allows. It restores the factory expansion capability without modifying the server chassis or mainboard.

Limited to PCI Interface and Single Server Model

The riser uses the standard PCI interface, which limits throughput compared to newer PCI Express standards. It is mechanically and electrically keyed only for the ProLiant DL320 G3 and will not fit other servers. Buyers needing PCIe slots or compatibility with different generation hardware cannot use this assembly.

特長

  • Designed for HP ProLiant DL320 G3 servers
  • Adds PCI expansion slots to the chassis
  • Genuine HP part number 305442-001 ensures fit
  • Riser card form factor saves rack space
  • New condition guarantees reliable installation

仕様

BrandHP
TypeRiser Card
External USB PortsNo

この商品に関する質問

Will the 305442-001 riser board fit inside my HP ProLiant DL320 G3 server chassis?

Yes, the 305442-001 is designed specifically for the HP ProLiant DL320 G3 server and mounts directly into its dedicated riser slot.

How do I install the 305442-001 riser card, and what step is often missed?

Power down the server, open the chassis, align the riser card with the motherboard connector, press firmly until seated, then secure the retention bracket — skipping the bracket screws leaves the card loose.

Does the 305442-001 riser assembly have any parts that wear out or need periodic replacement?

The riser board is a passive circuit board with no moving parts, fans, or batteries, so it requires no scheduled maintenance or component replacement.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。