暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch hard drive mounted in a metal hot-swap tray with a front handle

HP

HP 518737-001 600Gb 10000Rpm 3.5" Fibre Channel Drive With Tray

SKU CH-3GBA-YA79R

600 Gb 10000 Rpm Fibre Channel hard drive with hot-swap tray for server storage

  • 600 Gb capacity stores large datasets
  • 10 000 rpm spindle speed delivers fast data access
  • Fibre Channel interface connects to enterprise storage arrays
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables drive replacement without system shutdown

HP 518737-001 600Gb Fibre Channel Drive

This HP 518737-001 is a 600Gb 3.5-inch Fibre Channel hard drive spinning at 10000Rpm. It arrives new with a hot-swap tray for direct installation into compatible Storageworks EVA enclosures. The unit is built for enterprise storage arrays requiring Fibre Channel connectivity.

Storage Array Upgrades

Suits administrators expanding capacity in an existing Fibre Channel SAN that accepts 3.5-inch hot-swap trays. Not for buyers needing a different physical interface, a 2.5-inch form factor, or a non-hot-swap mounting style.

Fibre Channel Interface Decides Fit

The drive uses a Fibre Channel interface, so the host controller, backplane and cabling must all support that protocol. Verify the enclosure accepts 3.5-inch trays and the required spindle speed before purchase.

特長

  • 600 Gb capacity stores large datasets
  • 10 000 rpm spindle speed delivers fast data access
  • Fibre Channel interface connects to enterprise storage arrays
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray enables drive replacement without system shutdown

仕様

BrandHP

この商品に関する質問

Will the 3.5 inch drive with tray fit my HP StorageWorks EVA enclosure?

The drive is a 3.5 inch form factor and ships with the tray attached, so it slides directly into a compatible HP StorageWorks EVA bay.

How do I install this hot-swap Fibre Channel drive without powering down the server?

Open the enclosure door, slide the tray into an empty bay until the connector seats firmly, then close the latch to lock it in place.

When should I expect to replace the 10000 rpm drive in a production array?

Enterprise 10000 rpm drives typically run for several years; monitor SMART alerts and array logs for reallocated sectors or rising latency as replacement indicators.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。