暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver metal server power supply unit with rear fan grille and power connector

HP

HP 613663-001 240W server power supply

SKU CH-BFDZ-PB5X9

240W server power supply compatible with HP Pro 4000, 4300 and 6300 series desktops

  • Weight1.76
  • Delivers 240 W to keep compatible servers running
  • Fits HP 4000 Pro SFF and Pro 4300 SFF systems
  • Supports Pro 6300 Microtower configurations
  • Genuine HP part 613663-001 ensures correct pinout
  • Weighs 1.76 kg for standard rack handling

240W HP Server Power Supply

This is a new 240W server power supply from HP, part number 613663-001. It weighs 1.76 and is built for compatible HP and Compaq small-form-factor and microtower desktops. The unit delivers the rated wattage for the listed workstation configurations. It serves as a direct replacement for the original equipment in those systems.

Fits Pro 4300 SFF and Pro 6300 MT

The supply supports a long list of specific models including the 4000 Pro SFF, Compaq Pro 4300 SFF and Pro 6300 MT families with various processors such as G1610, G2030, i3-3220, i3-3240, i5-3470S, i5-3470, i5-3570 and i7-3770. Buyers with systems outside this exact compatibility list should verify fitment before ordering. Units requiring a higher output or a different form factor cannot use this part.

240W Output Rating

The single deciding specification is the 240W power rating. If the target workstation demands more than 240W, this unit will not meet the load. Confirm the original power supply wattage matches this figure before purchase.

特長

  • Delivers 240 W to keep compatible servers running
  • Fits HP 4000 Pro SFF and Pro 4300 SFF systems
  • Supports Pro 6300 Microtower configurations
  • Genuine HP part 613663-001 ensures correct pinout
  • Weighs 1.76 kg for standard rack handling

仕様

BrandHP
Model613663-001
Weight1.76

この商品に関する質問

Does the HP 613663-001 240W unit use a standard ATX connector or a proprietary server pinout?

This supply uses a proprietary HP server connector; it will not plug into a standard ATX motherboard without an adapter.

What chassis clearance does the 1.76 kg HP 613663-001 need for the rear exhaust and mounting tabs?

Allow at least 40 mm behind the rear panel for the exhaust grille and the two sliding mounting tabs that lock into the Pro 4300 SFF or Pro 6300 MT bays.

Which step do installers most often miss when seating the HP 613663-001 in a Compaq Pro 4300 SFF?

They forget to press the amber release latch fully until it clicks; the supply then sits loose and loses power contact.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。