暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive mounted in black server tray

HP

HP 649401-001 500 Gb 7200 Rpm 3.5 Inch Sata Hard Drive With Tray

SKU CH-8KK4-77TY0

A 500 Gb 3.5 inch Sata hard drive spinning at 7200 Rpm, supplied with a tray for internal server installation

  • 500 Gb capacity stores large datasets
  • 7200 Rpm spindle speed enables quick data access
  • 5 inch form factor fits standard drive bays
  • Sata interface connects directly to server backplanes
  • Included tray simplifies installation in HP servers

HP 649401-001 500 Gb SATA Drive

This HP 649401-001 is a 3.5 inch internal hard drive with a 500 Gb capacity. It spins at 7200 Rpm and connects through a Serial Ata-300 interface. The unit ships with a tray for server installation. It suits administrators adding midline storage to compatible HP systems.

Upgrade from smaller midline drives

The drive replaces lower-capacity 3.5 inch SATA units in the same midline class. The jump is worth it when current bays are full and the array controller supports the 300 MB/s link speed. It does not serve workloads that demand faster spindle speeds or larger caches.

SATA 300 interface limits

The Serial Ata-300 interface caps sustained throughput at 300 MB/s regardless of spindle rate. Mechanical latency at 7200 Rpm remains the bottleneck for random I/O patterns. The 3.5 inch form factor requires a matching drive bay and backplane power connector. Builders needing higher throughput or smaller modules must choose a different interface standard.

特長

  • 500 Gb capacity stores large datasets
  • 7200 Rpm spindle speed enables quick data access
  • 5 inch form factor fits standard drive bays
  • Sata interface connects directly to server backplanes
  • Included tray simplifies installation in HP servers

仕様

BrandHP

この商品に関する質問

Will the 3.5-inch drive tray fit a standard server drive bay?

The 3.5-inch form factor matches standard server drive bays and the included tray secures with typical screw holes.

How do I install the SATA drive and what step is often missed?

Slide the drive into the tray, secure it with screws, connect the SATA data and power cables, then ensure the tray locks fully into the bay.

When should I plan to replace this 7200 RPM midline drive?

Midline drives are rated for nearline workloads; monitor SMART data and replace if reallocated sectors or seek errors appear.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。