暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch bare SATA hard drive with green circuit board

HP

HP 664016-001 3TB 3.5" SATA 7200 RPM 6Gb/s internal hard drive

SKU CH-1DSG-4KSBF

3 TB desktop hard drive with a 3.5 inch form factor, SATA interface, 7200 RPM spindle speed and 6 Gb/s transfer rate

  • PackagingBare Drive
  • InterfaceSATA
  • Capacity3TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • UsageIdeal for Servers
  • 3 TB capacity stores large datasets and backups
  • 7200 RPM spindle speed delivers fast sequential throughput
  • SATA 6 Gb/s interface connects to standard desktop and server ports
  • 5 inch form factor fits regular drive bays and trays
  • HP part 664016-001 ensures compatibility with qualified systems

HP 3 TB 7200 RPM SATA Hard Drive

This HP 664016-001 is a 3.5 inch desktop internal hard drive with a 3 TB capacity. It spins at 7200 RPM and connects through a SATA interface rated at 6 Gb/s. The drive is supplied new as a bare unit without a tray or mounting hardware.

Suited for storage expansion in compatible servers

The 7.2K spindle speed and SATA connection make this drive appropriate for bulk storage in systems that accept 3.5 inch SATA drives. Builders who need a smaller form factor, a different interface or a higher transfer rate should look at other options.

3 TB capacity and 7200 RPM spindle speed

These two figures determine whether the drive matches the storage space and performance level your system requires. Verify that your chassis and controller support 3.5 inch SATA drives before purchasing.

特長

  • 3 TB capacity stores large datasets and backups
  • 7200 RPM spindle speed delivers fast sequential throughput
  • SATA 6 Gb/s interface connects to standard desktop and server ports
  • 5 inch form factor fits regular drive bays and trays
  • HP part 664016-001 ensures compatibility with qualified systems

仕様

BrandHP
Model664016-001
PackagingBare Drive
InterfaceSATA
Capacity3TB
RPM7200 RPM
Average Latency6Gb/s
UsageIdeal for Servers
Form Factor3.5"

この商品に関する質問

How much space does the 3TB capacity actually provide once the drive is formatted in a server?

The operating system reports capacity in binary units, so the usable space will be less than the labelled 3TB; the exact figure depends on the file system and partition scheme chosen.

What does the 6Gb/s SATA interface limit in real use?

The SATA 6Gb/s link caps the maximum burst transfer rate at 6 gigabits per second; sustained throughput will be lower and is governed by the 7200 RPM mechanical speed.

What mounting hardware does the 3.5-inch form factor require?

The drive fits a standard 3.5-inch internal bay and uses the usual four side-mount screws; no tray or caddy is included with the bare drive.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。