暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

HP

HP 753874-B21 6TB 7200 RPM SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-NF6A-G01H2 MPN 753874-B21

A 6TB 3.5-inch SATA hard drive spinning at 7200 RPM for cost-efficient bulk storage in desktop or entry server systems

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • FeaturesDesigned and Engineered to Provide Reliable and Cost Efficie
  • 6TB capacity stores large data sets
  • 7200 RPM spindle delivers responsive read and write speeds
  • SATA 6.0Gb/s interface provides high-throughput connectivity
  • 5 inch form factor fits standard desktop drive bays
  • Midline design balances reliability and cost for archival workloads

Capacity and interface

This HP 753874-B21 is a 6TB 3.5-inch internal hard drive that spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It is built for entry servers and external storage arrays that need economical reliability and performance for non-mission critical applications. The drive targets environments with low workloads of 40% or less where cost per gigabyte matters most.

Compatibility checks

Verify that your system has a free 3.5-inch drive bay measuring at least 146.1mm in length, 101.6mm in width and 26.1mm in height. Confirm the motherboard or controller provides a SATA 6.0Gb/s port and that the power supply includes a spare SATA power connector. Ensure the operating environment suits a midline drive rated for workloads of 40% or less.

Build quality and daily use

The bare drive ships without a tray, so mounting hardware must be supplied by the chassis or purchased separately. HP qualification testing covers SMART support and integration with HP Systems Insight Manager for monitoring. The midline design prioritises reliable operation in backup and archival roles rather than continuous heavy write cycles.

特長

  • 6TB capacity stores large data sets
  • 7200 RPM spindle delivers responsive read and write speeds
  • SATA 6.0Gb/s interface provides high-throughput connectivity
  • 5 inch form factor fits standard desktop drive bays
  • Midline design balances reliability and cost for archival workloads

仕様

BrandHP
Model753874-B21
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity6TB
RPM7200 RPM
Average Latency6Gb/s
FeaturesDesigned and Engineered to Provide Reliable and Cost Efficient Data Storage
Increased Midline drive reliability. Lowers cost without sacrificing reliability with Enterprise class hard drives at the lowest $/GB.
Cost optimized and capacity optimized solutions that provide up to 3TB storage in a single device. Available in 2.5-inch (SFF) and 3.5-inch (LFF) form factors in a wide variety of capacity points.
Rotational Vibration Sensors: Enhanced rotational vibration tolerance provides Enterprise class reliability in a Midline drive.
6Gb/sec data transfer rate supporting existing servers
Form Factor3.5"
Height (maximum)26.1mm
Width (maximum)101.6mm
Length (maximum)146.1mm
配送重量1.36 kg
梱包サイズ371 × 258 × 66 mm

この商品に関する質問

Does the bare-drive 753874-B21 ship with a mounting tray or SATA cables, or must they be purchased separately?

The unit is supplied as a bare drive only; no tray, screws or cables are included.

When should I choose the 7200 RPM 6TB midline drive instead of a lower-speed or smaller-capacity model?

Select this drive when you need 6TB capacity with 7200 RPM performance for workloads at 40 % utilisation or below.

What does the 7200 RPM figure mean for actual throughput in a server or desktop?

At 7200 RPM the drive delivers sustained sequential speeds suited to backup, archival and entry-server workloads running at up to 40 % duty cycle.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。