暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive bare unit

HP

HP 807581-001 6TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-X3Z7-8FH73

A 6 TB 3.5" SAS hard drive spinning at 7200 RPM with a 12 Gb/s transfer rate

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • Form Factor3.5"
  • 6 TB capacity for large-scale data storage
  • 7200 RPM spindle speed for responsive throughput
  • SAS 12 Gb/s interface for fast host transfers
  • 5-inch form factor fits standard drive bays
  • New condition with original HP part number 807581-001

HP 6 TB SAS 12 Gb/s Hard Drive

This new 3.5 inch internal drive delivers 6 TB of storage on a SAS interface rated at 12 Gb/s. It spins at 7200 RPM with an average latency specified as 6 Gb/s. The unit ships as a bare drive without a tray or bracket.

Suited for servers and arrays needing SAS

The drive fits 3.5 inch bays and connects via SAS, making it appropriate for compatible enterprise or workstation chassis. Systems that lack a SAS host bus adapter or backplane cannot install this drive. Buyers who need a different physical size or a non-SAS interface should consider other options.

Interface is SAS at 12 Gb/s

The specification that determines compatibility is the SAS interface running at 12 Gb/s. Your controller or backplane must support this exact interface and speed for the drive to function.

特長

  • 6 TB capacity for large-scale data storage
  • 7200 RPM spindle speed for responsive throughput
  • SAS 12 Gb/s interface for fast host transfers
  • 5-inch form factor fits standard drive bays
  • New condition with original HP part number 807581-001

仕様

BrandHP
Model807581-001
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity6TB
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"

この商品に関する質問

Will the 3.5" form factor fit a standard desktop drive bay?

Yes, the 3.5" form factor matches standard desktop internal drive bays and uses the common SAS connector layout.

What is the correct way to install the drive into an HP server tray?

Slide the bare drive into the compatible HP tray until the SAS connector seats firmly, then secure the tray screws before inserting into the bay.

How often should I check the 7200 RPM drive for bearing wear?

Monitor SMART attributes for reallocated sectors and seek errors annually; replace if the drive reports increasing error counts or unusual noise.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。