EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
HP
500W ATX power supply delivering 12V at 11.4A, 5V at 18A and 3.3V at 23A for HP xw6200 workstations
This 500W ATX unit matches the original DPS-470AB specification used in HP XW6200 workstations. It accepts 100-240V input at 47-66Hz and delivers 5V at 18A, 3.3V at 23A, 12V at 11.4A, -12V at 0.5A and 5VSB at 1.5A. The part numbers 345642-001, 345525-004 and 345525-002 identify the exact assembly.
The supply operates from a wide 100-240V mains range at 47-66Hz without a voltage selector switch. Rated output is 500W continuous across the combined rails listed above. No fan-speed curve or acoustic data is provided in the manufacturer highlights.
This unit replaces the factory DPS-470AB when the original supply fails or shows unstable voltages. The jump is worth it when the workstation will not power on, restarts under load or reports rail voltages outside ATX tolerance. It restores the original 500W capacity without modification.
| Type | ATX |
|---|
Slide the unit into the chassis until the latch clicks, then attach the 24-pin ATX main power, the 4-pin CPU auxiliary and the peripheral Molex leads; the 4-pin CPU plug is the one most frequently overlooked.
Clean the intake vents and internal heatsinks every 6-12 months; the internal cooling fan is the only moving part and should be replaced if it becomes noisy or stops spinning.
The 12 V rail is rated at 11.4 A, so heavy GPU or CPU draw reaches that ceiling before the combined 500 W rating is met.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?