暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 1U rack server with eight front 2.5 inch drive bays

HP

HP ProLiant DL160 Gen9 1U rack server E5-2603v3 1.6GHz 16GB DDR4 B140i 8 SFF

SKU CH-TR0E-Y45H8

1U rack server with Xeon E5-2603v3 six-core 1.6GHz, 16GB DDR4, B140i SATA RAID and eight 2.5-inch bays

  • TypeRack
  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon E5 v3
  • MAX Processors2
  • ChipsetIntel C610

Installed Memory Size 16GB

HDD None

  • Six-core Xeon E5-2603v3 at 1.6 GHz handles multi-threaded workloads
  • 16 GB DDR4 ECC registered memory supports data integrity
  • B140i software RAID enables SATA RAID 0, 1, 5
  • Redundant hot-swap 550 W power supply protects uptime
  • 1U rack form factor with eight 2.5-inch SFF drive bays

1U rack server for scale-out workloads

The HP ProLiant DL160 Gen9 fits a single Intel Xeon E5-2603 v3 six-core processor at 1.6 GHz with 16 GB of DDR4 memory installed across 16 DIMM slots. Redundant hot-swap power supplies and eight 2.5-inch drive bays support SATA RAID 0, 1 or 5 through the B140i controller. Matrox G200 graphics provide basic video output.

Suits single-socket deployments needing dense

This chassis targets environments that run one processor and rely on SATA drives for capacity or boot volumes. The B140i controller does not support SAS disks, so workloads requiring hardware RAID or SAS connectivity should look elsewhere. Dual-socket configurations are possible but require a second processor kit not included here.

Eight SFF bays with SATA-only RAID

The eight small-form-factor bays accept 2.5-inch SATA drives managed by the B140i software RAID engine limited to RAID 0, 1 and 5. No SAS or hardware RAID capability is present, making this the deciding specification for storage planning.

特長

  • Six-core Xeon E5-2603v3 at 1.6 GHz handles multi-threaded workloads
  • 16 GB DDR4 ECC registered memory supports data integrity
  • B140i software RAID enables SATA RAID 0, 1, 5
  • Redundant hot-swap 550 W power supply protects uptime
  • 1U rack form factor with eight 2.5-inch SFF drive bays

仕様

BrandHP
SeriesProLiant
ModelProliant DL160 G9
TypeRack
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon E5 v3
MAX Processors2
ChipsetIntel C610
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity16GB
Memory Features16 DIMM slots, 8 per processor. (4GB/8GB/16GB/32GB/64GB DDR4 up to 2400MT/s ECC Registered, actual memory speed dependent on the processor capability).
Number of Memory Slots16
Storage ControllerB140i Software RAID
SSD (Installed)No
Raid Level0,1,5
Media DrivesNone
GPU TypeMatrox G200
Video Memory16MB
Remote ManagementiLO Management (standard).
LAN Ports2 x Ports
Expansion SlotsCPU1 PCIe Riser 1: 2 PCIe 3.0 Slots (1 & 2) available: 1x Full-Height Half Length, 1x Low Profile slot. Optional kit available to install Flexible LOM in slot 1. CPU 2 Riser (Optional): PCIe 3.0 slot 3 - Full-Height Half Height (Secondary PCIe Riser and dual CPU required).
Operating SystemNo
Compatible/Certified OSMicrosoft Windows Small Business Server 2011/2008, Microsoft Windows Server 2008 R2 SP1/SP2, Microsoft Windows HPC Server 2008 R2, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, Oracle Solaris
Weight63.0000LBS

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Which drives must I supply to use the eight 2.5-inch bays and the B140i controller?

The chassis holds eight 2.5-inch SFF bays and the B140i controller supports SATA only, so you need SATA SSDs or HDDs; SAS drives are not supported by this controller.

Can I add a second Xeon E5-2603v3 processor later without changing the memory configuration?

The board accepts two processors and provides eight DDR4 DIMM slots per CPU; adding the second processor simply unlocks the second bank of eight slots while the existing 16 GB remains in the first bank.

How can I verify the Matrox G200 video and dual 1 GbE ports are active after assembly?

Attach a monitor to the VGA port and confirm the Matrox G200 16 MB adapter appears in BIOS or OS device manager, then connect network cables and check both 361 Ethernet links show 1 Gb/s.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。