暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5-inch SATA hard drive with attached mounting tray

HPE

HPE 432341-B21 750GB 7200 RPM SATA 3.5" internal hard drive

SKU CH-W5XB-5SEMW

A 750 GB, 7200 RPM SATA 1.5 Gb/s 3.5-inch drive with hot-swap tray for desktop or server storage

  • InterfaceSATA 1.5Gb/s
  • Capacity750GB
  • RPM7200 RPM
  • Average Seek Time11ms
  • Form Factor3.5"
  • 750 GB capacity stores large data sets
  • 7200 RPM spindle delivers responsive read speeds
  • 11 ms average seek time reduces access latency
  • SATA 1.5 Gb/s interface connects to standard controllers
  • 5-inch form factor with tray enables hot-swap installation

HPE 750 GB SATA hard drive

This HPE 432341-B21 provides 750 GB of storage on a 3.5-inch SATA 1.5Gb/s interface spinning at 7200 RPM. It is built for non mission-critical server applications and storage environments with workloads of 40% or less.

Tray-attached hot-swap design

The drive ships with a tray attached for hot-swap installation in compatible HPE ProLiant server bays. This allows replacement without powering down the chassis, reducing downtime for low-workload arrays.

1.5 Gb/s SATA interface limit

The SATA 1.5Gb/s interface caps sustained throughput well below modern 3 Gb/s or 6 Gb/s controllers. Buyers needing higher sequential bandwidth should select a drive with a faster SATA revision.

特長

  • 750 GB capacity stores large data sets
  • 7200 RPM spindle delivers responsive read speeds
  • 11 ms average seek time reduces access latency
  • SATA 1.5 Gb/s interface connects to standard controllers
  • 5-inch form factor with tray enables hot-swap installation

仕様

BrandHPE
Part Number432341-B21
InterfaceSATA 1.5Gb/s
Capacity750GB
RPM7200 RPM
Average Seek Time11ms
Form Factor3.5"

この商品に関する質問

How often will the 750GB SATA drive need replacement under typical workloads?

The drive is rated for workloads of 40% or less; running it within that duty cycle gives the longest service life before a swap is needed.

What limits sustained throughput on the 1.5Gb/s SATA interface?

The 1.5Gb/s SATA link caps maximum transfer rate, so that interface ceiling appears before the 7200 RPM platters can deliver more data.

How much heat and noise does the 3.5-inch 7200 RPM drive produce during all-day operation?

The 3.5-inch 7200 RPM mechanism generates typical enterprise-level heat and acoustic output for continuous use in a server chassis.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。