暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver server power supply module with front-facing connector and ventilation grille

HPE

HPE 900W AC 240VDC PWR INPUT MDL FIO server power supply

SKU CH-547J-95DVS

A 900 W server power module accepting 120 V or 230 V AC input and 240 V DC input

  • TypePower Module
  • Input Voltage120 V AC 230 V AC
  • 900 W output delivers high-density server power
  • 120 V and 230 V AC input supports global rack deployments
  • 240 V DC capability enables efficient high-voltage distribution
  • Factory-integrated option simplifies initial system configuration
  • New condition ensures full manufacturer specification compliance

900 W AC input server power module

This 900 W unit is a hot-plug power module designed for HPE server platforms that accept Flexible I/O power supplies. It targets administrators who need a single high-capacity module to replace or expand the redundant power subsystem in a supported chassis.

Dual-range input at 120 V AC and 230 V AC

The module operates from either 120 V AC or 230 V AC mains, with a 240 V DC rating also specified. Supporting both common voltage ranges lets the same module stay in service when equipment moves between regions or rack power configurations without swapping hardware.

FIO form factor for tool-less bay installation

The Flexible I/O form factor slides directly into a compatible server bay and locks without tools, freeing internal cabling space and keeping airflow paths clear. It requires a chassis with matching FIO power slots and a backplane that distributes the module output to the system boards.

特長

  • 900 W output delivers high-density server power
  • 120 V and 230 V AC input supports global rack deployments
  • 240 V DC capability enables efficient high-voltage distribution
  • Factory-integrated option simplifies initial system configuration
  • New condition ensures full manufacturer specification compliance

仕様

BrandHP
TypePower Module
Input Voltage120 V AC 230 V AC

この商品に関する質問

How do I install this 900W power module in an HPE server chassis?

Slide the unit into the hot-plug bay until the latch clicks, then connect the 120 V AC or 230 V AC inlet cord; the step often missed is fully seating the latch so the module registers as present.

What maintenance will this power module need over time?

Periodically vacuum the intake vents and verify the front LED stays green; the internal fan is not user-serviceable, so a failed fan means replacing the whole 900W module.

At what load does the 240 V DC input limit appear during continuous operation?

The module delivers up to 900 W continuously; sustained draw at that level is the first limit, and the 120 V AC or 230 V AC input range does not increase the rating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。