暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rack server front panel with eight drive bays

HPE

HPE DL360 Gen10 8SFF 1x Xeon Silver 4114 256GB DDR4 No Drive Rack Server

SKU CH-7WRG-FRBVM

Rack server with one 2.2 GHz 10-core Xeon Silver 4114, 256 GB DDR4 ECC, eight 2.5-inch bays and dual 500 W supplies

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • 10-core Xeon Silver 4114 at 2.2GHz handles demanding workloads
  • 256GB DDR4 ECC memory supports large virtualisation deployments
  • Eight 2.5-inch drive bays with P408 SAS controller enable flexible storage
  • Dual 500W power supplies plus Intel 10GbE and 1GbE networking ensure uptime
  • HPE iLO Advanced remote management simplifies server administration

HPE DL360 Gen10 8SFF single Xeon server

The HPE DL360 Gen10 8SFF is a 1U rack-mount server configured with one Intel Xeon Silver 4114 processor running at 2.2 GHz and 256 GB of DDR4 ECC registered memory. It provides eight 2.5-inch drive bays and an HPE Smart Array P408 SAS controller for internal storage expansion. The unit ships without hard drives, allowing buyers to populate bays with SATA or SAS media that match their capacity and performance requirements.

Dual 500 W flex-slot supplies with iLO Advanced

Two 500 W hot-plug power supplies deliver redundant power while the integrated Intel I350 and X540 network adapters provide two 10 GbE and two 1 GbE ports. Remote management is handled by HPE iLO Advanced, enabling out-of-band monitoring, firmware updates and virtual console access without attaching a local display or keyboard. The server has passed full diagnostics and burn-in testing with BIOS and firmware updated to the latest stable versions.

Rail kit optional and drives sold separately

A rail kit is available on request but is not included in the standard shipment, so buyers planning cabinet installation should order it separately. No storage drives are installed; the eight SFF bays and P408 controller are ready for customer-supplied SATA or SAS drives up to the controller’s supported limits. The configuration supports a second Xeon Silver 4114 processor and additional DDR4 memory up to the platform maximum of 3 TB.

特長

  • 10-core Xeon Silver 4114 at 2.2GHz handles demanding workloads
  • 256GB DDR4 ECC memory supports large virtualisation deployments
  • Eight 2.5-inch drive bays with P408 SAS controller enable flexible storage
  • Dual 500W power supplies plus Intel 10GbE and 1GbE networking ensure uptime
  • HPE iLO Advanced remote management simplifies server administration

仕様

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)7,68
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

この商品に関する質問

How do I install the Xeon Silver 4114 processor and what step is commonly missed?

Align the processor with the socket notches, lower the retention lever fully, then apply the thermal interface material before mounting the heatsink — skipping the thermal material causes overheating.

What maintenance will the 256GB DDR4 memory require over time?

The ECC registered DDR4 modules need no scheduled replacement; run the built-in memory diagnostics via iLO annually and reseat any module that reports correctable errors.

Which limit appears first when the Smart Array P408 controller runs sustained write workloads?

The controller cache and SAS backplane bandwidth saturate before the 10‑core Xeon reaches full utilisation, capping sustained write throughput.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。