暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2U rack server with four front 3.5 inch drive bays

HPE

HPE DL380 Gen9 4LFF 2x Xeon E5-2650V4 128GB DDR4 rack server

SKU CH-7AHK-WP6BN

A 4-bay 3.5-inch rack server with dual 12-core 2.2 GHz Xeon processors, 128 GB DDR4 ECC memory and a P440 SAS controller, supplied without drives

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size128GB
  • Dual Xeon E5-2650V4 processors deliver 24 cores at 2.2GHz for demanding workloads
  • 128GB DDR4 ECC registered memory supports large virtualisation and database tasks
  • HPE Smart Array P440 SAS controller manages up to four 3.5-inch SATA drives
  • Dual 500W Flex Slot power supplies provide redundancy for continuous operation
  • HPE iLO Advanced remote management enables full out-of-band server control

HPE DL380 Gen9 4LFF dual Xeon server

The HPE DL380 Gen9 is a 4U rack-mounted server system built for enterprise workloads. It ships with two Intel Xeon E5-2650V4 processors running at 2.2GHz and 128GB of DDR4 ECC registered memory. The chassis provides four 3.5-inch large form factor drive bays and includes an HPE Smart Array P440 SAS controller with a 1GB Ethernet 332T adapter.

Suits virtualisation hosts needing dense CPU cores

This configuration suits teams running virtualisation clusters or database instances that benefit from 24 total cores and registered DDR4 memory. Buyers who need drives pre-installed, who require PCIe storage support beyond SAS and SATA, or who need a GPU for compute workloads should look elsewhere. The integrated graphics and dual 500W power supplies cover baseline management and redundancy.

Four 3.5-inch drive bays with P440 SAS RAID

The single specification that decides fit is the 4LFF chassis paired with the P440 controller, which supports SAS and SATA hard drives in RAID across four bays. Maximum memory capacity reaches 3TB across 24 DIMM slots when expansion is required. Remote management is handled through HPE iLO Advanced for out-of-band control.

特長

  • Dual Xeon E5-2650V4 processors deliver 24 cores at 2.2GHz for demanding workloads
  • 128GB DDR4 ECC registered memory supports large virtualisation and database tasks
  • HPE Smart Array P440 SAS controller manages up to four 3.5-inch SATA drives
  • Dual 500W Flex Slot power supplies provide redundancy for continuous operation
  • HPE iLO Advanced remote management enables full out-of-band server control

仕様

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)8,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

この商品に関する質問

Does the 128GB DDR4 ECC registered memory require a specific motherboard slot layout to reach full capacity?

The system board provides 24 DDR4 DIMM slots across both processors; populating all channels evenly lets the installed 128GB run at the rated 2.2GHz memory speed.

Can the P440 SAS controller manage the existing 3.5 SATA drives I plan to reuse in the four LFF bays?

Yes, the P440 supports both SAS and SATA protocols, so your current 3.5 SATA drives will be recognised and can be configured into RAID volumes.

After power-on, how do I confirm the dual Xeon E5-2650V4 CPUs and 128GB DDR4 are detected without entering the OS?

During POST the iLO firmware screen lists both 12-core processors at 2.2GHz and shows 128GB DDR4 memory before the boot loader starts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。