暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE 2.5 inch 1.80 TB SAS internal hard drive

HPE

HPE K2P94B 1.80 TB 2.5" SAS 10000 rpm internal hard drive

SKU CH-JQS1-SKQC0

A 1.80 TB SAS internal hard drive spinning at 10000 rpm in a 2.5 inch form factor, built for HPE 3PAR StoreServ 8000 storage systems

  • 80 TB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • SAS interface connects directly to enterprise controllers
  • 5 inch form factor fits dense drive bays
  • Validated for HPE 3PAR StoreServ 8000 storage systems

HPE K2P94B 1.80 TB SAS Drive

The HPE K2P94B is a 1.80 TB internal hard drive built for HPE 3PAR StoreServ 8000 Storage systems. It uses a SAS interface and spins at 10000 rpm in a 2.5 inch form factor. This new component is designed for enterprise storage arrays.

Suits 3PAR StoreServ 8000 upgrades

This drive fits administrators expanding or replacing disks in a compatible HPE 3PAR StoreServ 8000 array. It is not for buyers who need a different interface or a non-HPE storage platform. Desktop PC builders should look elsewhere.

SAS interface decides compatibility

The drive communicates over SAS, so the host controller or backplane must support that protocol. Verify the 3PAR StoreServ 8000 slot accepts 2.5 inch SAS drives before purchase. The 10000 rpm spindle speed targets performance workloads.

特長

  • 80 TB capacity stores large datasets
  • 10000 rpm spindle speed accelerates data access
  • SAS interface connects directly to enterprise controllers
  • 5 inch form factor fits dense drive bays
  • Validated for HPE 3PAR StoreServ 8000 storage systems

仕様

BrandHPE

この商品に関する質問

Should I pick the 1.80 TB 10000 rpm model for my 3PAR StoreServ 8000 array?

This K2P94B drive is validated for the HPE 3PAR StoreServ 8000 Storage system and delivers 1.80 TB at 10000 rpm in a 2.5" SAS form factor.

How does the 10000 rpm spindle speed translate to daily I/O on a 3PAR StoreServ 8000?

The 10000 rpm spindle provides low-latency random access for transactional workloads on the HPE 3PAR StoreServ 8000, with the SAS link handling the data path.

What SAS speed does the drive use and what throughput ceiling does that set?

The drive connects via SAS; the interface governs the maximum transfer rate between the drive and the HPE 3PAR StoreServ 8000 controller.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。