暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE 2.5 inch SAS solid state drive with carrier

HPE

HPE P06580-001 1.60 TB 2.5" SAS internal hard drive

SKU CH-KF52-3FTS4

A 1.60 TB 2.5" SAS solid state drive with mixed-use endurance and an included carrier for HPE ProLiant DL360 Gen10 servers

  • 60 TB capacity stores large datasets
  • SAS interface enables fast server data transfer
  • Mixed-use endurance handles read and write workloads
  • 5" form factor fits dense server bays
  • Includes drive carrier for direct ProLiant DL360 Gen10 installation

Product Identity

The HPE P06580-001 is a 1.60 TB solid state drive built for internal server deployment. It uses a SAS interface and a 2.5 inch form factor with an included drive carrier. The drive is designated for mixed use endurance and is validated for HPE ProLiant DL360 Gen10 Server compatibility.

Fit and Limits

This drive suits administrators expanding storage on supported HPE ProLiant servers where SAS infrastructure exists. Buyers without SAS backplanes or controllers cannot install this drive. It is not intended for desktop PCs or consumer laptops lacking enterprise drive bays and SAS connectivity.

Deciding Specification

The SAS interface is the single specification that determines whether this drive fits your environment. Your server or storage array must provide native SAS ports or a compatible SAS controller to recognise and operate the device.

特長

  • 60 TB capacity stores large datasets
  • SAS interface enables fast server data transfer
  • Mixed-use endurance handles read and write workloads
  • 5" form factor fits dense server bays
  • Includes drive carrier for direct ProLiant DL360 Gen10 installation

仕様

BrandHPE

この商品に関する質問

Will the 2.5" SAS drive fit into the existing drive bays of an HPE ProLiant DL360 Gen10 Server?

Yes, the 2.5" form factor and included carrier are designed for the drive bays in the HPE ProLiant DL360 Gen10 Server.

How can I confirm the 1.60 TB SAS SSD is recognised and healthy after installation?

The drive should appear in the server BIOS or HPE Smart Storage Administrator with its full 1.60 TB capacity and show a healthy SMART status.

Does the HPE P06580-001 ship with the drive carrier, or must it be purchased separately?

The drive includes the carrier, so no separate carrier purchase is required for installation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。