暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
HPE 1.92 TB SATA SSD in 2.5 inch form with 3.5 inch carrier

HPE

HPE P09693-B21 1.92 TB SATA internal solid state drive 2.5" 3.5" carrier read intensive

SKU CH-REWK-CXQBS

1.92 TB SATA solid-state drive with 2.5" form factor in a 3.5" carrier, rated 0.8 DWPD for read-intensive server workloads

  • NAND Flash Memory TypeSolid State Drive
  • 92 TB capacity for large read-heavy datasets
  • 8 DWPD endurance tuned for read-intensive workloads
  • SATA 600 interface for broad server compatibility
  • 5" drive in 3.5" carrier fits standard bays
  • Hot-pluggable design enables replacement without downtime

Purpose-built read-intensive SSD

The HPE P09693-B21 is a 1.92 TB solid-state drive designed for server workloads that demand high random read IOPS. It targets administrators who need to accelerate data-intensive applications with a drive classed as read intensive. The 0.8 DWPD endurance rating reflects a typical profile of less than one full drive write per day. This SATA device is not suited for write-heavy databases or logging workloads that exceed that endurance envelope.

Thermals noise and power in normal use

The 2.5 inch drive sits inside a 3.5 inch carrier that fits standard hot-plug server bays, allowing airflow to pass through the chassis design. With a height of .3 inches the slim profile does not impede cooling in dense configurations. Solid-state construction means no moving parts, so acoustic output is negligible during typical read-heavy operation. Power draw scales with the SATA 600 interface activity rather than mechanical seek cycles.

Build quality and daily handling

The Smart Carrier adds a do-not-remove button and status icons that reduce human error during drive swaps. Digitally signed firmware ensures the drive only runs code from a trusted source, protecting data integrity across the fleet. Hot-plug support lets technicians replace the unit without powering down the server, while the 3.5 inch carrier guarantees compatibility with existing drive trays. Over 3.35 million hours of qualification testing back the reliability claims for this read-optimised model.

特長

  • 92 TB capacity for large read-heavy datasets
  • 8 DWPD endurance tuned for read-intensive workloads
  • SATA 600 interface for broad server compatibility
  • 5" drive in 3.5" carrier fits standard bays
  • Hot-pluggable design enables replacement without downtime

仕様

BrandHPE
NAND Flash Memory TypeSolid State Drive

この商品に関する質問

How is the 2.5" drive fitted into the 3.5" carrier for a server bay?

Slide the 2.5" SSD into the supplied 3.5" carrier until it clicks, then insert the carrier into the hot-plug bay; the common mistake is not fully seating the carrier latch, which leaves the SATA/600 connector misaligned.

What maintenance or replacement will the 1.92 TB read-intensive SSD need later?

With 0.8 DWPD endurance, the drive wears only from heavy write workloads; monitor the Smart Carrier lifespan indicator and replace the SSD when it approaches the rated write limit.

What limit appears first during sustained reads on this SATA/600 SSD?

The SATA/600 interface caps sequential throughput at 600 MB/s, so sustained random-read IOPS will hit that bus ceiling before the NAND or controller reaches its own limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。