暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver power supply unit with rear exhaust grille and side handle, labelled HPE ProCurve J9306A

HPE

HPE ProCurve J9306A 1500W AC Power Supply

SKU CH-J4GD-B9R7H

Delivers 1500 W to HP ProCurve zl-series PoE switches, providing 300 W PoE+ at 110-127 V, 900 W PoE+ at 200-240 V, and 600 W for switch operation

  • ColorMulticolor
  • TypeProprietary Power Supply
  • Delivers 1500 W total output power
  • Provides 300 W PoE+ at 110-127 volts
  • Supplies 900 W PoE+ at 200-240 volts
  • Allocates 600 W for switch operation
  • Compatible with HP ProCurve zl-series PoE switches

ProCurve 1500W AC Power Supply

The HPE ProCurve J9306A is a proprietary 1500W AC power supply designed for HP ProCurve zl-series PoE switches. It delivers up to 600W for switch operation and additional power for PoE+ ports depending on the input voltage range.

Built for zl-series PoE switch deployments

This unit suits network administrators upgrading or replacing power supplies in compatible HP ProCurve 5412, 5400, 8200 and 8212 chassis. It is not suitable for non-zl series switches, standard ATX chassis or any device requiring a different proprietary form factor or connector.

1500W total output with voltage-dependent PoE+

At 110-127V input the supply provides 300W for PoE+ alongside 600W for the switch; at 200-240V the PoE+ budget rises to 900W. The 1500W ceiling limits total connected PoE+ devices, so high-density port populations may exceed the available power budget.

特長

  • Delivers 1500 W total output power
  • Provides 300 W PoE+ at 110-127 volts
  • Supplies 900 W PoE+ at 200-240 volts
  • Allocates 600 W for switch operation
  • Compatible with HP ProCurve zl-series PoE switches

仕様

BrandHPE
ColorMulticolor
TypeProprietary Power Supply

この商品に関する質問

Which HPE ProCurve zl-series switch models accept the J9306A 1500 W power supply?

The J9306A is compatible with HP ProCurve zl-series PoE switch models 5412, 5400, 8200 and 8212.

How does the PoE+ power budget change when the unit runs on a 110–127 V circuit versus a 200–240 V circuit?

At 110–127 V the supply delivers 300 W for PoE+; at 200–240 V it delivers 900 W for PoE+.

What front-panel indicators confirm the supply is operating correctly after installation?

The unit provides LED status lights that show input power present, output power good and fault conditions when the switch is powered on.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。