HyperX FURY HX316C10F/4 4GB DDR3 1600 CL10 desktop RAM
- 4GB
- DDR3 1600 (PC3 1280…
HyperX
8GB DDR3 desktop memory running at 1600MHz with CL10 latency and 1.5V operation
Capacity 8GB
This HyperX FURY module is 8GB DDR3 desktop memory built for plug-and-play upgrades. It targets gamers and PC builders who want a simple drop-in speed boost without manual BIOS tuning.
The decisive spec is DDR3 1600 (PC3 12800) with CAS Latency 10 at 1.50V. Automatic overclocking can raise the frequency to 1866MHz when the platform allows it, so this single number confirms whether the stick matches your board's rated speed and timing requirements.
An asymmetric aluminum heat spreader dissipates heat while the module runs at 1.50V; low-voltage 1.35V operation is also supported to draw less power and generate less heat. The unbuffered design keeps electrical load light for standard desktop workloads.
| Brand | HyperX |
|---|---|
| Series | FURY |
| Model | HX316C10F/8 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL10 |
| Voltage | 1.50V |
| Buffered/Registered | Unbuffered |
| Color | Blue |
| 配送重量 | 0.05 kg |
| 梱包サイズ | 150 × 55 × 14 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Yes, it is an unbuffered 240-pin DDR3 DIMM designed for desktop motherboards with DDR3 slots.
No, the module detects the platform and raises its frequency to 1866 MHz on its own when the board supports it.
The kit is rated for 1.50 V and will operate at that voltage on boards that do not offer the lower 1.35 V setting.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?