暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch IDE hard drive bare mechanism

IBM

IBM DTLA-307030 (07N5639) 30GB 7200RPM 3.5" IDE Internal Hard Drive

SKU CH-DH5A-7DMC7

30 GB 3.5" IDE internal hard drive spinning at 7200 RPM for desktop storage

  • Capacity30GB
  • RPM7200 RPM
  • Form Factor3.5"
  • 30 GB capacity stores documents and applications
  • 7200 RPM spindle speed delivers faster data access
  • 5 inch form factor fits standard desktop drive bays
  • IDE interface connects to legacy motherboard controllers
  • New condition ensures full manufacturer reliability

30GB 7200RPM IDE Hard Drive

The IBM DTLA-307030 is a 30GB internal hard drive spinning at 7200 RPM with a 3.5 inch form factor. It connects via an IDE interface and arrives as a new bare drive. This unit suits legacy desktops or industrial equipment that require this specific interface and physical size.

Suits older IDE systems only

This drive fits machines built for 3.5 inch IDE storage where 30GB capacity meets the requirement. It is not for laptops or compact devices needing 2.5 inch drives, nor for builds that demand higher capacities or faster transfer rates than this model provides.

IDE interface decides compatibility

The IDE connector is the single specification that determines whether this drive works in a given system. Motherboards or controllers without a matching IDE port cannot use this drive regardless of capacity or spindle speed.

特長

  • 30 GB capacity stores documents and applications
  • 7200 RPM spindle speed delivers faster data access
  • 5 inch form factor fits standard desktop drive bays
  • IDE interface connects to legacy motherboard controllers
  • New condition ensures full manufacturer reliability

仕様

BrandIBM
ModelDTLA-307030 (07N5639)
Capacity30GB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

Does the 3.5" DTLA-307030 need a desktop IDE controller to operate?

Yes, the 3.5 inch form factor and IDE interface require a standard desktop 40-pin IDE controller and matching power connector.

Will the 7200 RPM DTLA-307030 work on the same IDE channel as an older 30GB drive?

The drive uses a standard IDE interface so it can share a cable with another IDE device when jumpered correctly.

How can I confirm the 307030 is running at 7200 RPM after installation?

The BIOS will report the model DTLA-307030 and a 30GB capacity; SMART data or a diagnostic utility will show the 7200 RPM spindle speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。