暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SAS hard drive with exposed circuit board

IBM

IBM ST32000444SS Constellation ES 2 TB 3.5" 7200 RPM 16 MB SAS internal hard drive

SKU CH-AVZQ-VWAYG MPN ST32000444SS

A 2 TB 3.5-inch SAS hard drive spinning at 7200 RPM with 16 MB cache for desktop storage

  • 2 TB capacity stores large data sets
  • 7200 RPM spindle delivers fast sequential access
  • 16 MB cache buffers burst workloads
  • SAS interface enables dual-port enterprise connectivity
  • 5-inch form factor fits standard drive bays

2 TB SAS Enterprise Drive

The IBM Constellation ES ST32000444SS is a 2 TB hard disk drive built for 3.5 inch bays. It spins at 7200 RPM with a 16 MB cache and connects through a SAS interface. The unit is supplied in new condition.

Suits Servers Needing SAS Storage

This drive suits servers and storage arrays that require a 3.5 inch SAS hard drive with 7200 RPM performance. Buyers needing a different capacity, a 2.5 inch form factor, or a non-SAS interface should look at other models.

Interface Is SAS

The defining specification is the SAS interface, which determines controller and backplane compatibility. Verify that the target system supports SAS drives before purchasing.

特長

  • 2 TB capacity stores large data sets
  • 7200 RPM spindle delivers fast sequential access
  • 16 MB cache buffers burst workloads
  • SAS interface enables dual-port enterprise connectivity
  • 5-inch form factor fits standard drive bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What SAS speed does the ST32000444SS support, and what throughput ceiling does that set?

The drive uses a SAS interface; the practical throughput ceiling is the drive's own sustained transfer rate, which varies with zone and workload.

What physical clearance and mounting does the 3.5" Constellation ES need?

It requires a standard 3.5-inch drive bay and the matching SAS power and data connectors on the backplane or controller card.

What is the correct installation sequence for the SAS drive, and which step is often missed?

Secure the drive in the bay, attach the SAS data and power cables, then ensure the controller BIOS or OS recognises the new LUN before formatting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。