Intel
Intel D7-P5510 3.84 TB enterprise SSD
3.84 TB enterprise NVMe SSD delivering 6500 MB/s reads, 3400 MB/s writes and 7168 TBW endurance in a 2.5″ U.2 form factor
- High-capacity 3.84 TB storage for dense server workloads
- Sequential read speed up to 6500 MB/s via PCIe NVMe 4.0 x4
- Random read performance reaches 700000 IOPS for low-latency access
- High endurance rating of 7168 TBW supports sustained write workloads
- 256-bit encryption standard protects data at rest
Enterprise U.2 NVMe 3.84 TB SSD
The Intel D7-P5510 is a 3.84 TB enterprise solid state drive built for internal server deployment. It uses a 2.5-inch U.2 (SFF-8639) form factor and connects via PCI Express NVMe 4.0 x4, delivering sequential reads up to 6500 MB/s and writes up to 3400 MB/s with 256-bit encryption.
Suited for read-intensive data centre workloads
This drive fits servers that need high random read performance of 700000 IOPS and an endurance rating of 7168 TBW. It is not suited for builds that require a different physical connector or a higher random write ceiling than 170000 IOPS.
Deciding spec: U.2 (SFF-8639) NVMe interface
The U.2 connector and PCIe 4.0 x4 electrical interface determine whether this SSD can be installed in the target server backplane or drive cage. Verify that the system supports this exact interface before purchase.
特長
- High-capacity 3.84 TB storage for dense server workloads
- Sequential read speed up to 6500 MB/s via PCIe NVMe 4.0 x4
- Random read performance reaches 700000 IOPS for low-latency access
- High endurance rating of 7168 TBW supports sustained write workloads
- 256-bit encryption standard protects data at rest
仕様
この商品の仕様はまだ公開されていません。
この商品に関する質問
How can I verify the drive is delivering its rated 700000 IOPS random read and 170000 IOPS random write after installation?
Run a 4 KB random read/write workload with a tool such as fio or iometer on the U.2 NVMe 4.0 x4 link and compare the observed IOPS to the 700000 read and 170000 write figures.
What ships with the SSD and what must I source separately for a 2.5 inch U.2 server bay?
The drive itself (SSDPF2KX038TZ01) is supplied; a compatible 2.5 inch U.2 backplane or carrier, NVMe 4.0 x4 cabling, and server power are not included.
Which capacity and endurance variant of the D7-P5510 should I select for a write-heavy 3.84 TB workload?
This model provides 3.84 TB with 7168 TBW endurance and 256-bit encryption, matching the stated random write of 170000 IOPS and sequential write of 3400 MB/s.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



