暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver rectangular U.2 enterprise SSD with 15mm height

Intel

Intel D7-P5520 1.92TB NVMe U.2 15mm enterprise SSD

SKU CH-Z49M-B8HK7

1.92 TB enterprise NVMe SSD with PCIe 4.0 x4 interface in a 15 mm U.2 form factor

  • 92TB capacity supports large enterprise datasets
  • PCIe 4.0 x4 interface delivers high-throughput performance
  • NVMe protocol reduces latency for demanding workloads
  • 3D TLC NAND balances endurance with cost efficiency
  • U.2 15mm form factor fits dense server bays

Intel D7-P5520 1.92TB NVMe U.2 SSD

The Intel D7-P5520 is a 1.92TB enterprise solid-state drive built for PCIe 4.0 x4 servers. It uses 3D TLC NAND in a U.2 15mm form factor to deliver consistent throughput for read-intensive workloads.

Suited for read-heavy arrays, not write-heavy logs

This drive suits storage tiers that serve frequent reads such as content delivery, virtual desktop infrastructure or boot volumes. It is not designed for workloads that demand high sustained write endurance or the lowest possible latency.

Fits U.2 15mm bays with PCIe 4.0 backplanes

Installation requires a U.2 15mm drive bay and a backplane wired for PCIe 4.0 x4. The 15mm height frees standard 7mm slots for other devices while providing enterprise-grade capacity in a single slot.

特長

  • 92TB capacity supports large enterprise datasets
  • PCIe 4.0 x4 interface delivers high-throughput performance
  • NVMe protocol reduces latency for demanding workloads
  • 3D TLC NAND balances endurance with cost efficiency
  • U.2 15mm form factor fits dense server bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does my server need a U.2 15 mm drive bay to install this SSD?

Yes, this drive uses the U.2 15 mm form factor and requires a compatible hot-plug or fixed bay with the matching connector.

Will this PCIe 4.0 x4 SSD run at full speed in a PCIe 3.0 backplane?

It will operate at PCIe 3.0 x4 speeds when installed in a PCIe 3.0 backplane, limited by the slower link.

How can I verify the SSD is recognised at PCIe 4.0 x4 after installation?

Check the link width and speed in the OS with nvme list or smartctl, or view the negotiated link in the BIOS/UEFI device list.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。