Intel
Intel SSDSC2KB480GZ01 D3-S4520 480 GB SATA 2.5-Inch internal SSD
A 480 GB SATA 2.5-inch internal SSD delivering up to 550 MB/s sequential read and 460 MB/s sequential write speeds
- 480 GB capacity stores large workloads
- Up to 550 MB/s sequential read speeds accelerate boot and load times
- Up to 460 MB/s sequential write speeds handle heavy recording tasks
- SATA 3.0 6 Gb/s interface fits standard 2.5-inch bays
- Operates reliably from 0 °C to 70 °C
480 GB SATA 2.5-inch drive for read-heavy workloads
This Intel D3-S4520 solid-state drive delivers 480 GB of storage over a SATA 3.0 6Gb/s interface. It fits standard 2.5-inch bays in servers, workstations or laptops. Sequential reads reach 550 MB/s while writes reach 460 MB/s. The drive operates reliably between 0°C and 70°C.
No bundled accessories or software included
The product ships as a bare drive without mounting brackets, cables or management utilities. System builders must supply their own SATA data and power connections. No cloning software or firmware tools are provided in the package. Installation relies on the host platform's native SATA support.
SATA 3.0 6Gb/s interface limits peak throughput
The SATA 3.0 link caps sequential transfer rates at 550 MB/s read and 460 MB/s write. Systems requiring higher bandwidth or lower latency should consider drives with a different interface. This drive suits applications where SATA compatibility and steady read performance are the priority.
特長
- 480 GB capacity stores large workloads
- Up to 550 MB/s sequential read speeds accelerate boot and load times
- Up to 460 MB/s sequential write speeds handle heavy recording tasks
- SATA 3.0 6 Gb/s interface fits standard 2.5-inch bays
- Operates reliably from 0 °C to 70 °C
仕様
この商品の仕様はまだ公開されていません。
この商品に関する質問
How long before the 480 GB SATA 3.0 drive reaches its write endurance limit?
The D3-S4520 is rated for 1 drive write per day over its warranty period, so the 480 GB capacity can absorb 480 GB of new data daily before wear becomes a concern.
Which spec caps sustained throughput first during a long sequential job?
Sequential write tops out at 460 MB/s, which is lower than the 550 MB/s read ceiling, so the write path saturates first under continuous load.
What temperature and noise should I expect when the 2.5-inch SSD runs all day in a server?
With no moving parts the drive is silent, and the operating range of 0 °C to 70 °C means it stays within spec as long as chassis airflow keeps the case temperature below 70 °C.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM



