暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Intel XL710 single-port 40 GbE QSFP+ network adapter, green PCB, silver bracket

Intel

Intel XL710 40 GbE QSFP+ Single-Port Network Card

SKU CH-9M2E-2C91E

Single-port 40 GbE QSFP+ server network adapter with PCI-Express interface

  • InterfacePCI-Express
  • 40 GbE throughput for high-density server workloads
  • Single QSFP+ port for fibre or direct-attach cabling
  • PCI Express interface fits standard server slots
  • Intel XL710 controller offloads virtualization tasks
  • Converged adapter handles LAN and SAN traffic

Intel XL710 40 GbE QSFP+ Single-Port Adapter

This Intel network adapter delivers a single 40 GbE connection over a QSFP+ interface for servers that need high-throughput Ethernet. It fits a PCI-Express slot and targets data-centre workloads such as virtualization, LAN consolidation and storage networking.

Capacity and headroom: 40 GbE single port

The single 40 GbE port handles heavy east-west traffic, virtual-machine migration and storage replication without saturating a 10 GbE link. Headroom disappears when aggregate demand exceeds 40 Gbit/s or when multiple independent 40 GbE streams are required.

Practical limits of the PCI-Express interface

Throughput is bounded by the PCI-Express generation and lane count installed in the host server; an older or narrower slot will cap the realised bandwidth below the 40 GbE line rate. The QSFP+ transceiver and cable choice also define the maximum reach and power envelope.

特長

  • 40 GbE throughput for high-density server workloads
  • Single QSFP+ port for fibre or direct-attach cabling
  • PCI Express interface fits standard server slots
  • Intel XL710 controller offloads virtualization tasks
  • Converged adapter handles LAN and SAN traffic

仕様

BrandIntel
InterfacePCI-Express

この商品に関する質問

Will the Intel XL710 40 GbE QSFP+ card run in an older PCI-Express 2.0 server slot?

The adapter uses a PCI-Express interface and will operate in earlier PCIe generations at the speed the slot supports.

How can I verify the XL710 is linking at 40 GbE after installation?

Check the switch or OS network tool for a 40 Gbps link rate and confirm the QSFP+ module shows an active connection.

Does the retail XL710-QDA1 package include a QSFP+ transceiver or direct-attach cable?

The single-port adapter ships without a transceiver or cable; a compatible 40 GbE QSFP+ module or DAC must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。