暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 20cm 18AWG 24-pin dual PSU cable set of 10

JMT

JMT 24P 20+4 Pin Dual PSU Cable 18AWG 20cm 10 Pcs

SKU CH-5EY6-XDG8T

A 20 cm 18AWG cable links one 24-pin PSU to two motherboards for dual-power mining rigs

  • TypeAT
  • Connects one PSU to two motherboards for dual-system power
  • 20 cm cable length keeps dual-PSU wiring tidy inside the case
  • 18 AWG conductors handle high-current mining and gaming loads
  • 24-pin ATX connectors ensure broad motherboard compatibility
  • Pack of 10 cables supports multi-rig deployments

What it is and who it's for

This JMT cable set contains ten 20-centimetre adapters with 24-pin and 20+4-pin AT connectors built from 18AWG wire. It lets a single power supply feed two motherboards simultaneously, a configuration often used in mining rigs or dual-system test benches.

Who it suits and who should look elsewhere

Builders running multiple boards from one PSU will find the short length and dual-head design convenient. Anyone needing a standard single-board extension, longer reach for full-tower routing, or a different pin layout should choose another product.

Capacity and headroom

The 18AWG conductors handle the combined load of two ATX main-power sockets within typical desktop power envelopes. The 20cm span keeps voltage drop low between the PSU and both boards, but it offers no slack for widely spaced mounts or full-size chassis cable management.

特長

  • Connects one PSU to two motherboards for dual-system power
  • 20 cm cable length keeps dual-PSU wiring tidy inside the case
  • 18 AWG conductors handle high-current mining and gaming loads
  • 24-pin ATX connectors ensure broad motherboard compatibility
  • Pack of 10 cables supports multi-rig deployments

仕様

TypeAT

この商品に関する質問

What motherboard connector does the 24P dual cable plug into?

The cable uses a 20+4 pin ATX connector that fits standard 24-pin motherboard power sockets.

Can the 20cm cable reach a second motherboard mounted in a typical mining frame?

At 20 cm the cable is designed for side-by-side boards in a compact mining rig; measure your spacing before installing.

How do I confirm both motherboards receive power after connecting the dual cable?

Power on the PSU and verify that each board posts and shows stable voltage readings on its 24-pin rail.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。