JONSBO
JONSBO C6-ITX WHITE Mini-ITX PC case
A compact Mini-ITX chassis with all-mesh panels, a Velcro carry handle, tool-free top access, room for a 255 mm GPU, 170 mm cooler and 140 mm ATX power supply, plus three 120 mm fan positions
- TypeMini-ITX Desktop
- ColorWhite
- Case MaterialSteel
- Motherboard CompatibilityITX MINI-DTX
- Dust FiltersBottom
- Internal 3.5" Drive Bays1
Options C6-ITX White
- C6 Black
- C6 White
- C6 Handle Black
- C6-ITX Black
- C6-ITX White
- C6 MAX BLACK
- Adjustable Velcro carry handle for easy transport
- All-mesh panels on every side for unrestricted airflow
- Tool-free top cover and three inner side panels for quick hardware access
- Supports 255 mm graphics cards and 170 mm CPU coolers in a compact frame
- Fits Mini-ITX and Mini-DTX boards with ATX power supply up to 140 mm
Compact ITX chassis with carry handle
The JONSBO C6-ITX WHITE is a steel Mini-ITX desktop case finished in white. It accepts ITX and MINI-DTX motherboards and includes an adjustable Velcro carry handle on the top panel. All sides use mesh panels for unrestricted airflow. The upper cover opens without tools while the remaining three panels release from the inside. Maximum dimensions are 295.2 by 202 by 266 millimetres and weight is 2.5 kilograms.
Check PSU length and drive layout
Verify that your power supply is no longer than 140 millimetres because the bay only fits ATX units up to that size. The single 3.5-inch bay shares its mounting point with a bottom 120-millimetre fan position, so decide whether you need the hard drive or the extra intake before building. Graphics cards are limited to 255 millimetres in length and CPU coolers to 170 millimetres in height. Front I/O provides one USB 3.0 Type-C port, one USB 3.0 Type-A port and a combined audio and microphone jack.
Tool-free panels and removable front grille
The tool-free upper cover and internally released side panels make hardware swaps fast without a screwdriver. A removable ventilation grille on the front panel simplifies fitting the optional 120-millimetre fan. Three fan positions exist in total: top, rear and bottom, each accepting a 120-millimetre unit. One internal 2.5-inch bay is also available for solid-state storage. Four expansion slots support dual-slot graphics cards.
特長
- Adjustable Velcro carry handle for easy transport
- All-mesh panels on every side for unrestricted airflow
- Tool-free top cover and three inner side panels for quick hardware access
- Supports 255 mm graphics cards and 170 mm CPU coolers in a compact frame
- Fits Mini-ITX and Mini-DTX boards with ATX power supply up to 140 mm
仕様
| Brand | Jonsbo |
|---|---|
| Series | C6 series |
| Model | C6-ITX WHITE |
| Part Number | C6-ITX WHITE |
| Type | Mini-ITX Desktop |
| Color | White |
| Case Material | Steel |
| Motherboard Compatibility | ITX MINI-DTX |
| Dust Filters | Bottom |
| Internal 3.5" Drive Bays | 1 |
| Internal 2.5" Drive Bays | 1 |
| Expansion Slots | 4 |
| Front Ports | Type-C(20PIN)/USB3.0*1/AUDIO*1+MIC*1 (2 IN 1) |
| Fan Options | Top 120mm*1 / Rear 120mm*1 (Optional) Bottom 120mm*1 or 3.5”HDD |
| Side Air duct | Yes |
| Max GPU Length | 255 mm |
| Max CPU Cooler Height | 170 mm |
| Max PSU Length | 140 mm |
| Dimensions | 295.2x202 x266mm/ 11.62x7.95x10.47 " |
| Weight | 2.5kg/5.51kb |
| Features | Simple Compact Desktop ITX handled mesh PC case : Desktop ITX chassis,simple &compact,easy to place Adjustable carry handle on top by Velcro fastener Heat free-All sides in mesh Easy and quick disassembly design- Upper Cover Tool-free Open, the other 3 sides are topped from the inside Removable ventilation grille on the front panel for easy installation of the hard disk drive |
このモデルの他のバージョン
同シリーズにさらに 5点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
JONSBO C6-ITX BLACK Mini-ITX Mesh PC Case with Handle
- Mini-ITX Desktop
- Black
この商品に関する質問
Does the C6-ITX White include any fans or do I need to buy 120 mm fans separately?
No fans are included; the case supports up to three 120 mm fans at top, rear and bottom positions, so you must purchase them yourself.
Should I pick a Mini-ITX or Mini-DTX motherboard for this chassis?
Both form factors fit; the case accepts ITX and MINI-DTX boards, so choose whichever matches your feature needs.
Will a 255 mm graphics card and a 170 mm tower cooler fit together in this build?
Yes, the maximum GPU length is 255 mm and the maximum CPU cooler height is 170 mm, allowing both components simultaneously.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Wadermoon PCI-E 1X to 4 PCI-E USB 3.0 expansion card
- PCI Express to USB…
- 4 Port
Orico PE20-1C 20 Gbps USB 3.2 Gen 2x2 Type-C PCIe x4 expansion card
- PCI Express to USB…
- 1x USB Port
OWC 16GB DDR4 2666MHz CL19 ECC SODIMM 1.2V laptop RAM
- 16GB (1 x 16GB)
- 260-Pin DDR4 SO-DIMM








