暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 120mm reverse-blade ARGB case fan with dual infinite mirror rings and frosted blades

Jungle Leopard

Jungle Leopard Prism4 Ultra 120mm Reverse Blade ARGB Case Fan Black 1-Pack

SKU CH-AZT7-PEVB1

A 120 mm reverse-blade ARGB case fan with hydraulic bearing, 1850 RPM airflow and 29 dBA noise, plus dual infinite-mirror lighting that daisy-chains up to 6 units

  • TypeCase Fan
  • Fan Size120mm
  • Bearing TypeHydraulic Bearing
  • RPM1850RPM
  • LEDARGB

Color Black Reverse--1pack

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Dual infinite mirror design creates immersive 3D tunnel lighting
  • Dynamic ARGB sync offers 10+ effects via Aura Creator software
  • Whisper-quiet 9-blade design delivers 58.36CFM airflow at only 29dBA
  • Easy daisy-chain setup with built-in connectors supports cascading up to 6 fans
  • Reverse blade 120mm fan with hydraulic bearing spins at 1850RPM

Dual Infinite Mirror ARGB Fan

The Jungle Leopard Prism4 Ultra is a 120 mm case fan with a hydraulic bearing and ARGB lighting designed for builders who want strong visual impact inside a tempered-glass chassis. Its reverse-blade orientation lets it serve as an exhaust or intake option depending on the airflow plan.

Upgrade from single-ring LED fans

The dual infinite mirror adds a deep 3D tunnel effect that standard single-ring fans cannot produce, so the jump is worth it when lighting is a primary design goal. Builders who need more than six daisy-chained units or who prefer a non-ARGB aesthetic should look elsewhere.

Sustained-load behaviour

At 1850 RPM the fan moves 58.36 CFM while holding noise to 29 dBA, so acoustic output stays consistent during long gaming sessions rather than spiking under load. The hydraulic bearing maintains steady speed without the rattle that can develop in sleeve-bearing models after extended use.

特長

  • Dual infinite mirror design creates immersive 3D tunnel lighting
  • Dynamic ARGB sync offers 10+ effects via Aura Creator software
  • Whisper-quiet 9-blade design delivers 58.36CFM airflow at only 29dBA
  • Easy daisy-chain setup with built-in connectors supports cascading up to 6 fans
  • Reverse blade 120mm fan with hydraulic bearing spins at 1850RPM

仕様

BrandJungle Leopard
SeriesPrism4 Ultra
ModelJL Prism4 Ultra BK
TypeCase Fan
Fan Size120mm
Bearing TypeHydraulic Bearing
RPM1850RPM
LEDARGB

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 120mm reverse-blade frame fit standard 120mm mounting holes?

Yes, the 120mm frame uses the standard four-hole pattern found on most cases and radiators.

How do I connect the ARGB daisy-chain cables to the motherboard header?

Plug the first fan's male 3-pin ARGB connector into the motherboard's 5V ARGB header, then link each next fan's female to the previous male.

When should I consider replacing the hydraulic bearing?

The hydraulic bearing is sealed for life; replace the fan only if noise rises above 29dBA or airflow drops below 58.36CFM after years of use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。