暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three green ESP32 development boards with USB-C connectors and pin headers

KEHIPI

KEHIPI 3PCS ESP32 ESP-WROOM-32 CP2102 USB-C 30pin Development Board

SKU CH-5J5T-H0ZHY

Three ESP32 development boards with USB-C CP2102 interface, 30 pins, dual-core Wi-Fi and Bluetooth for IoT projects

  • 3 boards per pack for parallel prototyping
  • USB-C with CP2102 for direct serial flashing
  • ESP32 dual-core processor handles Wi-Fi and Bluetooth tasks
  • Integrated antenna plus RF amplifiers for stable 2.4 GHz links
  • 30-pin header exposes GPIOs for sensors and actuators

Ready-to-use IoT pack

This pack contains three identical ESP32 development boards, each built around the ESP-WROOM-32 module with a CP2102 USB-C interface. They arrive new and fully assembled, so you can start writing code the moment they are unpacked. The boards expose 30 pins and integrate the antenna, RF balun, power amplifiers, low-noise amplifiers and filter on the module itself.

Makers who want a small batch

The three-board bundle suits hobbyists, educators or prototypers who need several nodes for a mesh, a sensor array or a classroom exercise. If your project requires only a single board, or if you need a different pin count or a built-in battery charger, this pack will not match those requirements.

30-pin CP2102 USB-C interface

Each board provides 30 pins and a USB-C connector driven by a CP2102 USB-to-UART bridge, which is the single spec that decides whether the board fits your carrier, enclosure or breadboard layout.

特長

  • 3 boards per pack for parallel prototyping
  • USB-C with CP2102 for direct serial flashing
  • ESP32 dual-core processor handles Wi-Fi and Bluetooth tasks
  • Integrated antenna plus RF amplifiers for stable 2.4 GHz links
  • 30-pin header exposes GPIOs for sensors and actuators

仕様

BrandAITRIP

この商品に関する質問

What does the 30-pin count mean for wiring sensors and displays on this ESP32 board?

The 30 pins expose GPIOs, power rails, and serial interfaces so you can connect sensors, displays, and other peripherals directly to the module.

How does the CP2102 USB-C interface affect programming speed and power delivery?

The built-in CP2102 USB-to-UART bridge handles firmware uploads and serial monitoring over the Type-C port while also supplying 5 V power to the board.

What physical space and mounting options does the 30-pin module need?

The board uses a 30-pin header layout that fits standard solderless breadboards and perfboards with matching pin spacing.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。