暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four small green circuit boards with micro-USB ports and pin headers

KEHIPI

KEHIPI 4PCS Pro Micro ATmega32U4 5V 16MHz Development Board

SKU CH-BSXV-N18YJ

Pack of four ATmega32U4 boards with 5 V logic, 16 MHz clock, micro-USB programming and 12 digital I/Os

  • ATmega32U4 at 5V 16MHz delivers responsive control
  • Pre-flashed bootloader works with IDE v1.0.1 for quick starts
  • Hardware Rx/Tx serial simplifies device communication
  • 12 digital I/Os plus 10-bit ADC on 4 pins expands sensing options
  • On-board Micro-USB connector enables direct programming without extra hardware

Four-board development pack

The KEHIPI 4PCS Pro Micro ATmega32U4 5V 16MHz Development Board set supplies four microcontroller boards for makers building USB-enabled projects. Each board ships with the bootloader installed and pin headers fitted, ready for immediate use in keyboards, controllers or sensor nodes.

IDE 1.0.1 and USB limits

Programming relies on the Arduino IDE from version 1.0.1 and the on-board Micro-USB connector, so a host computer with a compatible USB port is required. The hardware serial Rx and Tx pins provide a direct UART link, but the USB interface itself is limited to full-speed operation.

12 digital I/Os and 10-bit ADC

Each board exposes 12 digital I/O lines and 4 analog inputs with 10-bit resolution, giving enough pins for moderate switch matrices or sensor arrays. Projects needing more analog channels, higher-resolution conversion or additional PWM outputs will exceed the capabilities of the ATmega32U4.

特長

  • ATmega32U4 at 5V 16MHz delivers responsive control
  • Pre-flashed bootloader works with IDE v1.0.1 for quick starts
  • Hardware Rx/Tx serial simplifies device communication
  • 12 digital I/Os plus 10-bit ADC on 4 pins expands sensing options
  • On-board Micro-USB connector enables direct programming without extra hardware

仕様

BrandAITRIP
Part Number16947

この商品に関する質問

Should I choose the 4-board pack or a single board for my project?

The listing supplies four identical Pro Micro boards, each with an ATmega32U4 running at 5 V and 16 MHz, so one pack covers multiple prototypes or spares.

What does the 16 MHz clock speed mean when the board is running my sketch?

The ATmega32U4 executes instructions at 16 million cycles per second, giving deterministic timing for USB communication and real-time I/O tasks.

How does the Micro-USB connector limit programming and power options?

The on-board Micro-USB port handles both 5 V power input and serial programming through the pre-loaded bootloader, requiring only a standard cable.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。