暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
New KHACHIMO ATX power supply unit, rectangular metal chassis

KHACHIMO

KHACHIMO 15V 3A 45W ATX power supply for VOF-45-15-C1

SKU CH-5YQM-KXYXC

A 45 W ATX power supply delivering 15 V at 3 A for the VOF-45-15-C1 unit

  • TypeATX
  • Delivers stable 15 V output for reliable ATX system power
  • 3 A current rating supports consistent 45 W performance
  • ATX form factor ensures direct compatibility with VOF-45-15-C1 units
  • Tested working before shipment for immediate installation confidence
  • Built with good-quality components for dependable long-term operation

Dedicated ATX replacement for VOF-45-15-C1

This KHACHIMO unit is a new ATX power supply rated at 15 volts, 3 amps and 45 watts. It is built specifically to match the VOF-45-15-C1 part number. The supply has been tested working and is listed as good quality.

Suitable for direct VOF-45-15-C1 swaps.

It suits technicians replacing a failed VOF-45-15-C1 module in compatible equipment. Builders needing a different output voltage, higher wattage or a standard PC ATX pin-out should look at something else.

The 15 V 3 A 45 W output rating is the deciding spec

This single electrical rating determines whether the unit will power the target device correctly. Verify that the original hardware requires exactly 15 volts at 3 amps before purchasing.

特長

  • Delivers stable 15 V output for reliable ATX system power
  • 3 A current rating supports consistent 45 W performance
  • ATX form factor ensures direct compatibility with VOF-45-15-C1 units
  • Tested working before shipment for immediate installation confidence
  • Built with good-quality components for dependable long-term operation

仕様

TypeATX

この商品に関する質問

How much heat and noise does the 45 W ATX unit produce when running continuously?

The supply is rated at 45 W output; typical efficiency for this class keeps waste heat low and the fan runs quietly under normal loads.

What existing connectors or cables must I already have to install this ATX power supply?

You need a standard ATX 24-pin motherboard connector plus any CPU, PCIe or peripheral cables your build requires.

Will this 15 V 3 A unit work reliably with older motherboards and drives I plan to keep?

Yes, the ATX form factor and standard voltage rails are compatible with legacy boards and drives that accept ATX power.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。