暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver metal ATX power supply unit with ventilation slots and output terminals

KHACHIMO

KHACHIMO ACMM70 14.4V Medical Switching Power Supply 70W

SKU CH-N0CY-MDH8B

Medical switching power supply delivering 70 W across 5 V, 12 V, -12 V and 14.4 V rails

  • TypeATX
  • Delivers 70 W total output for medical equipment
  • Provides +5 V, +12 V, -12 V and +14.4 V rails
  • ATX form factor fits standard chassis
  • Verified working and built to medical-grade quality

KHACHIMO ACMM70 70W Medical Power Supply

This KHACHIMO ACMM70 unit is a 70W medical switching power supply designed for equipment that requires regulated DC outputs. It delivers +5V, +12V, -12V and +14.4V rails from a standard ATX form factor. The unit is supplied new and has been tested working. It suits builders integrating power into medical-grade devices or specialised industrial systems needing these specific voltage lines.

Suited for multi-rail medical or industrial builds

This supply suits integrators who need the combined +5V, +12V, -12V and +14.4V outputs in an ATX package. It is not for builders who need higher total wattage than 70W. It is not for standard PC builds that only require typical ATX voltages without the -12V or +14.4V rails. Buyers needing different voltage combinations or alternative form factors should look at other units.

特長

  • Delivers 70 W total output for medical equipment
  • Provides +5 V, +12 V, -12 V and +14.4 V rails
  • ATX form factor fits standard chassis
  • Verified working and built to medical-grade quality

仕様

TypeATX

この商品に関する質問

Will the 14.4 V rail on this ACMM70 power supply run alongside my existing 12 V and 5 V devices without conflict?

The unit provides +5 V, +12 V, -12 V and +14.4 V rails simultaneously, so your current 12 V and 5 V equipment can stay connected while the 14.4 V rail powers the medical device.

How can I verify the ACMM70 is delivering the rated 70 W across all rails after installation?

Measure each output with a multimeter under load; you should read +5 V, +12 V, -12 V and +14.4 V within tolerance while the combined draw does not exceed 70 W.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。