暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular ATX power supply unit, matte black finish, standard mounting holes, cooling fan visible on one side

KHACHIMO

KHACHIMO ATX Power Supply 24V 8A 8000MA

SKU CH-K2GE-897ZC

ATX power supply delivering 24 V at 8 A for MKAC-96-248000M systems, tested and verified working

  • TypeATX
  • ATX form factor fits standard PC cases
  • Delivers 24 V at 8 A for stable power
  • 8000 mA rated output current capacity
  • Unit is tested and confirmed working
  • New condition ensures full reliability out of the box

ATX 24 V 8 A desktop power supply

The KHACHIMO ATX unit delivers 24 volts at 8 amps for systems that require this specific voltage and current combination. It is built to the ATX form factor so it fits standard chassis mounting points. The module is supplied new and has been tested working by the manufacturer.

Suits builders replacing a 24 V ATX brick

This supply matches hardware that draws up to 8 A at 24 V from an ATX connector. It will not suit builds that need a different output voltage, higher amperage or a non-ATX connector layout. Buyers whose equipment specifies another voltage or current rating should look at a different unit.

24 V 8 A fixed output specification

The single deciding figure is the 24 volt 8 amp fixed output. If the target device calls for exactly 24 V at 8 A via an ATX interface, this unit meets that requirement; otherwise it is not compatible.

特長

  • ATX form factor fits standard PC cases
  • Delivers 24 V at 8 A for stable power
  • 8000 mA rated output current capacity
  • Unit is tested and confirmed working
  • New condition ensures full reliability out of the box

仕様

TypeATX

この商品に関する質問

Will this ATX 24 V 8 A unit power an older MKAC-96-248000M board that still draws 8000 mA?

Yes — the supply delivers 24 V at 8 A, matching the 8000 mA requirement of the MKAC-96-248000M, so the older board will receive the correct current.

How can I confirm the PSU is working after I install it?

The unit was test-working before shipment; after fitting it, measure 24 V at the output terminals with a multimeter to verify normal operation.

What comes in the box and do I need any extra cables?

Only the ATX power supply itself is included; any ATX cables or connectors required for your specific build must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。