暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO FSP 1U DC 200W ATX Power Supply FSP200-63DL

SKU CH-DTD9-J85XE

A 1U ATX power supply delivering 200 W with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support

  • TypeATX
  • Modern Standby support for rapid wake-from-sleep
  • 80 PLUS Gold efficiency cuts power draw and heat
  • Zero RPM fan mode delivers silent low-load operation
  • Resonant LLC topology with DC-to-DC conversion ensures clean power
  • Compact 1U ATX form factor fits space-constrained builds

1U 200 W ATX power supply

This KHACHIMO FSP unit is a 1U form-factor ATX power supply rated at 200 W. It targets compact servers, thin clients or small-form-factor workstations where vertical space is limited and reliable DC-to-DC conversion is required.

80 PLUS Gold efficiency upgrade

The 80 PLUS Gold certification replaces lower-rated bronze or unrated units, cutting waste heat and fan noise. The jump is worth it when the chassis airflow is restricted or when the system runs continuously and electricity cost matters.

Modern Standby and zero-RPM compatibility

Verify that the motherboard supports Modern Standby sleep states to use the fast wake feature. Confirm the case accepts a 1U PSU and that the 200 W output covers the combined CPU, GPU and peripheral draw before ordering.

特長

  • Modern Standby support for rapid wake-from-sleep
  • 80 PLUS Gold efficiency cuts power draw and heat
  • Zero RPM fan mode delivers silent low-load operation
  • Resonant LLC topology with DC-to-DC conversion ensures clean power
  • Compact 1U ATX form factor fits space-constrained builds

仕様

TypeATX

この商品に関する質問

What case clearance does the 1U FSP200-63DL need?

The unit is a 1U form factor, so it fits in any chassis that accepts a 1U power supply; verify your case lists 1U PSU support before buying.

How do I connect the FSP200-63DL to the motherboard?

Install the PSU into the 1U bay, secure it with the mounting screws, then attach the 24-pin ATX, 4/8-pin CPU and peripheral cables; the step often missed is fully seating the 24-pin connector until the latch clicks.

What part of the FSP200-63DL will need attention after extended use?

The internal cooling fan is the only moving component; if bearing noise appears years later the fan can be serviced, while the 80 PLUS Gold certified electronics are solid-state and maintenance-free.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。