暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular ATX power supply module, matte metal finish

KHACHIMO

KHACHIMO HD4830-3 48V 30A Rectifier Module power supply

SKU CH-726R-XMCER

ATX rectifier module delivering 48 V at 30 A for reliable power conversion

  • TypeATX
  • Delivers 48 V output for stable system power
  • Supplies up to 30 A current for demanding components
  • ATX form factor fits standard chassis layouts
  • Tested working to confirm reliable operation
  • Built with quality components for consistent performance

Product identity

The KHACHIMO HD4830-3 is a 48V 30A rectifier module built to the ATX form factor. It is intended for system integrators and technicians who need a high-current DC power source in a standard chassis slot.

Capacity and headroom

The unit delivers up to 30 amps at 48 volts, providing substantial headroom for dense compute or telecom loads. It will run out of headroom when the combined draw exceeds its rated current or when the input voltage falls outside the module’s operating window.

Build integration

As an ATX-format module it installs directly into a compatible chassis or shelf without custom brackets. The design frees up internal space by consolidating rectification into a single slot, though the builder must provide adequate airflow and a suitable 48 V distribution bus.

特長

  • Delivers 48 V output for stable system power
  • Supplies up to 30 A current for demanding components
  • ATX form factor fits standard chassis layouts
  • Tested working to confirm reliable operation
  • Built with quality components for consistent performance

仕様

TypeATX

この商品に関する質問

Will the HD4830-3 48V 30A Rectifier Module fit into my existing ATX chassis and power older components?

The unit follows the ATX form factor, so it mounts in standard ATX cases and delivers 48 V at up to 30 A for compatible legacy hardware.

How can I verify the rectifier module is operating correctly after installation?

The supplier confirms each unit is test working; check that the output measures a steady 48 V under load and that the module powers your equipment without shutdown.

What accessories are included with the HD4830-3 and what must I source separately?

Only the rectifier module itself is supplied; ATX power cables, mounting screws and any required DC distribution wiring must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。