暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular ATX power supply unit in metal casing

KHACHIMO

KHACHIMO HD4850-2 48V 50A ATX power supply

SKU CH-13JG-565XV

ATX power supply delivering 48 volts at 50 amps for industrial systems

  • TypeATX
  • Reliable ATX form factor fits standard cases
  • Stable 48 V rail delivers consistent power
  • High 50 A output supports demanding loads
  • Tested working ensures dependable operation
  • Quality components built for long service life

Specialised 48 V ATX supply

This KHACHIMO unit delivers a single 48 V rail rated at 50 A in a standard ATX form factor. It is intended for equipment that draws power directly from a 48 V bus rather than the usual desktop voltages.

Industrial and test environments

The design suits rack-mounted gear, telecom hardware or lab fixtures that require a steady 48 V source. It is not appropriate for ordinary PC builds that depend on conventional multi-rail outputs or for any system expecting standard ATX voltage distribution.

48 V 50 A single-rail output

The defining specification is the 48 V rail capable of 50 A continuous current. Verify that every load in the target chassis operates from this voltage before installation.

特長

  • Reliable ATX form factor fits standard cases
  • Stable 48 V rail delivers consistent power
  • High 50 A output supports demanding loads
  • Tested working ensures dependable operation
  • Quality components built for long service life

仕様

TypeATX

この商品に関する質問

What ATX motherboard connector does the HD4850-2 require to deliver its 48V 50A output?

The unit uses a standard ATX connector, so any motherboard with a matching 24-pin ATX socket will receive the full 48V 50A rating.

Will the HD4850-2 power a legacy PCIe card that only draws 12V through the motherboard slot?

This supply provides 48V output; it does not generate 12V rails, so a legacy 12V-only card cannot be powered directly from the motherboard slot.

How can I verify the HD4850-2 is delivering 48V at 50A after installation?

Measure the main ATX output with a multimeter under load; a reading near 48V that holds steady up to 50A confirms the unit is operating as specified.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。