暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO LPS363-M 12V 30A 5V 2A ATX power supply

SKU CH-7YB7-7NSF4

ATX power supply delivering 12 V at 30 A and 5 V at 2 A for reliable system power

  • TypeATX
  • ATX form factor fits standard desktop cases
  • 12 V rail delivers 30 A for high-demand components
  • 5 V rail supplies 2 A for peripheral power
  • Unit tested and confirmed working before shipment
  • Quality construction ensures reliable long-term operation

ATX power supply for legacy systems

The KHACHIMO LPS363-M delivers 12 V at 30 A and 5 V at 2 A in a standard ATX form factor. It suits older workstations or industrial PCs that rely on these voltage rails. Builders restoring vintage hardware will find the output profile matches many period-correct motherboards.

Installation notes for ATX units

The unit fits a regular ATX mounting pattern and uses the standard main power connector. Technicians should verify that the 12 V and 5 V current ratings satisfy every component before powering on. A common issue is forgetting to connect the 5 V rail when the board requires it for standby logic.

Practical limits of the ATX interface

The ATX standard caps the 5 V rail at 2 A on this model, so boards with heavy 5 V logic loads may exceed the supply. The 12 V rail provides 30 A, which covers most single-CPU configurations of that era. Systems needing higher 5 V current or additional rails will require a different supply design.

特長

  • ATX form factor fits standard desktop cases
  • 12 V rail delivers 30 A for high-demand components
  • 5 V rail supplies 2 A for peripheral power
  • Unit tested and confirmed working before shipment
  • Quality construction ensures reliable long-term operation

仕様

TypeATX

この商品に関する質問

How can I verify the LPS363-M is working correctly after installation?

The unit is test working from the factory. After setup, confirm the 12V rail delivers 30A and the 5V rail delivers 2A under load.

What comes in the box with the KHACHIMO LPS363-M and what must I source separately?

The power supply unit itself is included. ATX mounting screws and any required cables for your specific build are not included.

Which LPS363-M version should I choose for a build needing 12V 30A and 5V 2A?

The LPS363-M is a single specification model rated at 12V 30A and 5V 2A. There are no alternative versions or capacities listed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。