暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver power supply module with front panel display and ventilation slots

KHACHIMO

KHACHIMO monitoring unit module Flatpack2 48/3000 241119.100 3000W power supply

SKU CH-F4G3-RBFZ2

ATX monitoring unit module delivers 3000 W at 48 V with part number 241119.100

  • TypeATX
  • Monitoring unit manages 48 V DC systems
  • 3000 W output supports high-density telecom racks
  • Flatpack2 architecture enables hot-swap module replacement
  • Part 241119.100 verified tested and working

48 V 3000 W ATX power module

The KHACHIMO Flatpack2 monitoring unit module delivers 3000 W of power in an ATX form factor. It operates at a 48 V input and is supplied new with a test-working verification. The unit suits system integrators and technicians who need a high-output, rack-style supply for industrial or server chassis.

Replaces lower-wattage ATX units

This module steps up from standard ATX supplies that top out below 3000 W, letting a single unit handle loads that would otherwise require multiple supplies. The jump is worth it when your chassis accepts the Flatpack2 footprint and your distribution bus runs at 48 V. Builders whose systems use a different input voltage or cannot accommodate the module's physical envelope should look elsewhere.

特長

  • Monitoring unit manages 48 V DC systems
  • 3000 W output supports high-density telecom racks
  • Flatpack2 architecture enables hot-swap module replacement
  • Part 241119.100 verified tested and working

仕様

TypeATX

この商品に関する質問

What ATX form-factor dimensions does the Flatpack2 48/3000 monitoring unit module require for mounting?

The module follows the standard ATX form factor, so it fits any chassis or rack tray designed for ATX power supplies with matching screw-hole spacing.

How is the Flatpack2 48/3000 module installed, and which step is most often missed?

Slide the unit into the ATX bay, secure it with the four mounting screws, then connect the 48 V DC input and 3000 W output cables; the step most often missed is tightening the DC-input connector locking latch.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。