暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO MPSU6000 48V 2x63A BM/6xLM 219942 power supply

SKU CH-VZSJ-823RD

48 V ATX power supply delivering 6 000 W with two 63 A battery-management and six load-management outputs for ELTEK embedded systems

  • TypeATX
  • Delivers 6000 W total power for demanding embedded systems
  • 48 V output with dual 63 A modules ensures stable high-current supply
  • Six load modules provide flexible distribution for ELTEK platforms
  • Tested working and built to good quality standards for reliable operation

KHACHIMO MPSU6000 48V Embedded Power Supply

This KHACHIMO MPSU6000 unit delivers 48V output with a 6000W capacity for ELTEK embedded power systems. It provides two 63A BM outputs and six LM outputs in an ATX form factor. The module is new and has been tested working for reliable deployment.

Suits ELTEK systems needing 48V 6000W

This supply fits ELTEK embedded installations requiring the specific 2x63A BM and 6xLM output configuration. It is not for builds needing different voltage rails, alternate connector layouts, or lower power ratings. Buyers without ELTEK hardware should look elsewhere.

特長

  • Delivers 6000 W total power for demanding embedded systems
  • 48 V output with dual 63 A modules ensures stable high-current supply
  • Six load modules provide flexible distribution for ELTEK platforms
  • Tested working and built to good quality standards for reliable operation

仕様

TypeATX

この商品に関する質問

How much heat and noise should I expect from the MPSU6000 when it runs continuously at 48 V and 63 A per module?

The unit is rated for 48 V output with two 63 A modules, delivering up to 6000 W total; sustained loads at that level will generate significant heat, so forced-air cooling in the rack is required, and fan noise will be noticeable in a quiet room.

What existing ELTEK infrastructure must I already have for the MPSU6000 219942 to slot in and operate?

It is designed for ELTEK embedded power shelves that accept BM and LM modules, so you need a compatible shelf with the correct backplane and controller to provide 48 V distribution and monitoring.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。