暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO PDC350S12-CF 350W 12V power supply

SKU CH-W8SK-FA536

A 350 W ATX power supply delivering 12 V output for standard desktop builds

  • TypeATX
  • Delivers 350 W of reliable ATX power
  • Stable 12 V rail feeds critical components
  • Tested working before it leaves the factory
  • Built with good-quality components for durability
  • First listed by the manufacturer in 2024

Power module for ATX builds

The KHACHIMO PDC350S12-CF is a 350W ATX power supply built for systems that require a standard 12V rail. It suits builders assembling or repairing desktop PCs where a tested, working unit is the priority. The module delivers the core voltages a typical motherboard and drives expect.

Verified build quality and ATX fit

Each unit is test working before it leaves the factory, confirming reliable start-up and stable output under load. The ATX form factor means it mounts directly into standard chassis cut-outs and aligns with the usual screw pattern. Connectors follow the ATX pin-out, so daily cable routing matches familiar layouts without adapters.

Practical limits of the 350W ATX standard

The 350W ceiling caps the total power available to every component combined, so configurations with high-end discrete graphics or many drives may exceed the budget. The single 12V rail design simplifies wiring but shares its current across CPU and GPU loads. Builders who need more headroom or multiple 12V rails should look beyond this capacity.

特長

  • Delivers 350 W of reliable ATX power
  • Stable 12 V rail feeds critical components
  • Tested working before it leaves the factory
  • Built with good-quality components for durability
  • First listed by the manufacturer in 2024

仕様

TypeATX

この商品に関する質問

What ATX standard does this 350 W supply follow, and what output does it cap at?

It is an ATX-type unit rated for 350 W total output with a 12 V rail.

What physical space does the PDC350S12-CF need inside a case?

As an ATX form-factor module it fits a standard ATX mounting cut-out and screw pattern.

How do you install this power module, and which step is often missed?

Secure the unit with four case screws, then connect the 24-pin ATX and 12 V cables; the step often missed is plugging in the 12 V auxiliary connector.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。