暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver ATX power supply unit with cooling fan and cable bundle

KHACHIMO

KHACHIMO PMT 12V 4.2A 50W ATX Power Supply

SKU CH-A5Q0-VNF4Q

A 12V 4.2A ATX unit delivering 50W with 80 PLUS Gold efficiency, Modern Standby support, Zero RPM fan mode and resonant LLC topology with DC-to-DC conversion

  • TypeATX
  • Fast wake-from-sleep with Modern Standby support
  • Lower power draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power from resonant LLC with DC-to-DC
  • 12 V output at 4.2 A delivers 50 W

50 W ATX Power Supply

The KHACHIMO PMT unit delivers 12 V at 4.2 A for a total of 50 W, making it suitable for low-power industrial PCs, thin clients or embedded systems that require an ATX form factor. Its 80 PLUS Gold rating ensures high efficiency across the load range.

Standard ATX mounting and connectors

Installation follows the usual ATX screw pattern and main power connector, so it fits existing chassis cut-outs without modification. The resonant LLC topology with DC-to-DC conversion reduces coil whine, though builders should verify that the 50 W ceiling covers every rail their board draws.

50 W output ceiling

The 50 W limit restricts use to platforms with very modest CPU and peripheral demands; discrete graphics cards or multi-drive arrays will exceed the available power. Zero RPM fan mode keeps acoustics low at light loads, but sustained heavy draw will activate cooling and still cannot raise the wattage ceiling.

特長

  • Fast wake-from-sleep with Modern Standby support
  • Lower power draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power from resonant LLC with DC-to-DC
  • 12 V output at 4.2 A delivers 50 W

仕様

TypeATX

この商品に関する質問

How can I confirm the 12V rail is delivering 4.2A after installation?

Use a multimeter on the 12V rail while the system is under load; a steady reading near 12V at up to 4.2A shows the 50W unit is working as intended.

Which cables and connectors come in the box with this ATX power supply?

The box includes the ATX power supply unit with its fixed cables; no modular cables or extra adapters are supplied.

Should I choose the 12V 4.2A 50W version or a higher-wattage model for my build?

Select this 12V 4.2A 50W unit only if your total system draw stays below 50W; otherwise choose a higher-wattage ATX supply.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。