暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular ATX power supply unit with metal casing and cooling fan grille

KHACHIMO

KHACHIMO PSR300-A ATX power supply 300W

SKU CH-YPDX-W62HG

An ATX power supply delivering 300 W for desktop systems, first listed in 2024

  • TypeATX
  • ATX form factor fits standard desktop cases
  • 300 W rated output powers entry-level builds
  • Tested working before shipment ensures reliability
  • Good quality components support stable operation
  • First listed by manufacturer March 2024

KHACHIMO ATX 300W power supply

The KHACHIMO PSR300-A is an ATX form-factor power supply rated at 300 watts. It is built for standard desktop chassis and carries a new condition. The unit has been tested working and is presented as a good-quality replacement part. First listed by the manufacturer in March 2024.

Suits basic desktop builds.

This supply fits office PCs, home-office workstations or entry-level configurations that draw modest power. It is not for gaming rigs, workstations with discrete graphics cards or any build whose components exceed the 300-watt rating. Builders needing headroom for future upgrades should look at higher-capacity units.

300-watt ATX output decides fit

The single specification that determines compatibility is the 300-watt ATX output. If the total system draw stays within this limit and the case accepts a standard ATX supply, the PSR300-A will power the machine. If the build requires more wattage, this unit cannot meet the need.

特長

  • ATX form factor fits standard desktop cases
  • 300 W rated output powers entry-level builds
  • Tested working before shipment ensures reliability
  • Good quality components support stable operation
  • First listed by manufacturer March 2024

仕様

TypeATX

この商品に関する質問

Will this PSR300-A unit power on without a 24-pin ATX motherboard connector already installed?

The PSR300-A is an ATX-type supply so it requires a standard 24-pin motherboard connector to deliver power to the system.

Can the PSR300-A run in a chassis that still uses the older 20-pin main power header?

The PSR300-A follows the ATX form factor which normally provides a 24-pin connector; a 20-pin motherboard would need an adapter not mentioned in the specifications.

How can I confirm the PSR300-A is delivering stable voltage after installation?

The supplier notes each unit is test working, so verifying operation means checking that the system posts and runs without unexpected shutdowns.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。