暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 1U redundant power supply 73.5x40x265mm with handle and grille

KHACHIMO

KHACHIMO PWS-2K05A-1R 2000W Redundant Titanium Power Supply 1U 73.5x40x265mm CRPS

SKU CH-7EHD-8ATPR

2000W Titanium redundant CRPS unit in 1U form factor measuring 73.5x40x265mm

  • TypeATX
  • 2000W Titanium efficiency reduces energy waste
  • Redundant design keeps systems running during a failure
  • 1U 73.5x40x265mm CRPS form factor fits dense racks
  • Tested working and built with good quality components

2000W Titanium CRPS power supply

This 1U redundant unit delivers 2000W of AC power in a CRPS form factor measuring 73.5 by 40 by 265 millimetres. It is built for server and high-density compute chassis that require hot-swap power modules. The Titanium efficiency rating reduces waste heat and operating cost in always-on environments.

Sustained-load behaviour

Titanium-class efficiency keeps conversion losses low during continuous full-load operation, limiting internal temperature rise. Redundant architecture allows a second module to share current, so each unit runs well below its thermal limit. The 1U height and fixed dimensions leave no room for extra airflow, so sustained output depends on the chassis providing adequate front-to-back cooling. Buyers needing higher single-unit wattage or non-redundant designs should look elsewhere.

特長

  • 2000W Titanium efficiency reduces energy waste
  • Redundant design keeps systems running during a failure
  • 1U 73.5x40x265mm CRPS form factor fits dense racks
  • Tested working and built with good quality components

仕様

TypeATX

この商品に関する質問

How much heat and fan noise does the 2000W Titanium unit produce when it runs continuously in a 1U slot?

The supply is rated 2000W with Titanium efficiency, so waste heat and fan noise are kept low even under sustained load in the 73.5 x 40 x 265 mm CRPS form factor.

Which server chassis and backplane do I need to have in place before installing this CRPS module?

You need a 1U chassis that accepts a 73.5 mm wide CRPS redundant power supply and provides the matching AC input connector for the PWS-2K05A-1R.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。