暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
KHACHIMO S1200 DS625-3 ATX power supply unit, rectangular metal casing with ventilation grille

KHACHIMO

KHACHIMO S1200 Storage Power Supply DS625-3 ATX

SKU CH-SZCK-67RZD

A 1200 watt ATX power supply tested for reliable storage server operation

  • TypeATX
  • Tested and working for reliable operation
  • 1200 W output supports demanding builds
  • ATX form factor fits standard cases
  • Good quality components ensure stable power
  • First listed April 2024 as a new design

S1200 Storage Power Supply DS625-3 ATX

The KHACHIMO S1200 Storage Power Supply DS625-3 is an ATX form factor unit built for storage-heavy systems. It delivers a 1200 W rated output with a 625 W secondary rail to support multiple drive arrays. First listed by the manufacturer in 2024, the unit arrives new and test verified.

Suits multi-bay NAS and RAID builds.

This supply fits builders populating six or more drive bays who need sustained power for spin-up and rebuild cycles. The high secondary capacity handles dense 3.5 inch arrays without voltage sag. Compact workstations or single-drive desktops gain no benefit from the extra headroom and should select a smaller unit.

1200 W total output with 625 W dedicated rail

The defining specification is the 1200 W total rating paired with a 625 W allocated rail for storage devices. This split determines whether the unit can start and run a full complement of mechanical drives simultaneously. Verify your array peak draw against the 625 W figure before purchasing.

特長

  • Tested and working for reliable operation
  • 1200 W output supports demanding builds
  • ATX form factor fits standard cases
  • Good quality components ensure stable power
  • First listed April 2024 as a new design

仕様

TypeATX

この商品に関する質問

What ATX motherboard connector does the DS625-3 require to deliver its 1200 W output?

The DS625-3 uses a standard 24-pin ATX main power connector plus the required EPS and PCIe cables to supply 1200 W to a compatible motherboard.

Will the DS625-3 power an older system that still uses a 20-pin main connector and Molex drives?

The unit provides a 24-pin ATX connector that fits 20-pin sockets with the four extra pins overhanging, and it includes Molex peripherals for legacy drives.

How can I confirm the DS625-3 is operating correctly after installation?

The unit is factory test-working; after install, verify the fan spins, the motherboard POSTs, and all drive and GPU power LEDs illuminate.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。