暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO UAW125S-12 12V 8.5A-10.6A power supply

SKU CH-ACYZ-8AH1E

Industrial and medical 12 V power supply delivering 8.5 A to 10.6 A continuous output

  • TypeATX
  • Delivers stable 12 V output for industrial medical equipment
  • Provides up to 10.6 A peak current for demanding loads
  • 125 W capacity supports continuous operation
  • ATX form factor fits standard industrial chassis

Industrial 12 V power supply

This KHACHIMO UAW125S-12 unit delivers a 12 V output with a current range of 8.5 A to 10.6 A. It is built to ATX form factor and intended for industrial and medical equipment installations. The supply has been tested for correct operation and is offered in new condition.

Suited for 12 V industrial

Engineers integrating 12 V industrial or medical hardware that accepts an ATX-format supply can use this model. Buyers who require a different output voltage, a higher current rating or a non-ATX mechanical format should look at other options.

特長

  • Delivers stable 12 V output for industrial medical equipment
  • Provides up to 10.6 A peak current for demanding loads
  • 125 W capacity supports continuous operation
  • ATX form factor fits standard industrial chassis

仕様

TypeATX

この商品に関する質問

What connectors does the UAW125S-12 need from my ATX motherboard?

This unit follows the ATX form factor, so it uses the standard 24-pin main power connector plus the 4-pin or 8-pin CPU power connector found on modern boards.

Will the UAW125S-12 run stably with a legacy system that only draws 5 A on the 12 V rail?

Yes, the supply delivers 12 V at 8.5 A continuously and up to 10.6 A peak, so a 5 A load is well within its operating range.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。