暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
KHACHIMO YM-2151F 150W ATX power supply unit

KHACHIMO

KHACHIMO YM-2151F 150W ATX Power Supply

SKU CH-DQKX-S25TS

A 150W ATX power supply tested working for reliable system power delivery

  • TypeATX
  • 150W output powers basic ATX builds reliably
  • 3-year listing period signals sustained manufacturer support
  • Tested working before shipment ensures immediate operation
  • Good-quality components deliver stable voltage rails
  • Standard ATX form factor fits most chassis

150 W ATX power unit

The KHACHIMO YM-2151F delivers 150 watts of continuous power in a standard ATX form factor. It is intended for basic desktop builds, office refreshes or low-demand replacement scenarios where a modest power budget is sufficient.

Tested reliability and standard connectors

Each unit is test working before shipment and described by the supplier as good quality. The ATX design ensures compatibility with mainstream motherboards and drive connectors found in typical tower chassis.

Replaces ageing or failed low-wattage units

This supply upgrades systems that currently run on worn or under-rated PSUs of similar capacity. The jump is worthwhile when the existing unit shows instability, noise or cannot sustain the 150 W load required by the installed components.

特長

  • 150W output powers basic ATX builds reliably
  • 3-year listing period signals sustained manufacturer support
  • Tested working before shipment ensures immediate operation
  • Good-quality components deliver stable voltage rails
  • Standard ATX form factor fits most chassis

仕様

TypeATX

この商品に関する質問

What ATX standard does the 150W YM-2151F follow, and what power ceiling does that impose?

The unit is an ATX-type supply rated at 150 W, so its combined output cannot exceed that figure.

What physical space and mounting pattern does the YM-2151F require?

It uses the standard ATX form factor, fitting a regular ATX case cut-out with four rear mounting screws.

How is the YM-2151F installed, and which step is often missed?

Secure the unit with four screws, connect the 24-pin motherboard and 4/8-pin CPU cables, then switch the rear I/O toggle on.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。