暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR2 DIMM with black chips, 1GB

Kingston Technology Corp.

Kingston Technology Corp. KC6844-ELG37 1GB DDR2 desktop RAM

SKU CH-D993-9J40R

1GB DDR2 desktop DIMM at 533 MHz with CL4 latency for older system upgrades

  • Capacity1GB
  • CAS LatencyCL4
  • 1GB desktop DDR2 module for legacy system upgrades
  • CL4 latency supports responsive operation at rated speed
  • PC4200 (533 MT/s) rating matches DDR2-533 motherboard specs
  • Unbuffered 240-pin DIMM fits standard desktop slots
  • 8 V operation aligns with DDR2 voltage requirements

Kingston 1GB DDR2 Desktop Module

This Kingston Technology Corp. desktop memory module provides 1GB of DDR2 capacity for older systems. It operates at PC4200 (533) speed with a CAS Latency of CL4 and runs on 1.8V. The unbuffered DIMM uses a 240-pin interface and a 2RX8 chip organisation. It is supplied in new condition.

Suits legacy DDR2 upgrades; not for modern builds

This module suits owners of desktop motherboards that accept DDR2 PC4200 memory and need a 1GB stick to maintain or repair an existing system. It will not help builders who want higher capacities, faster speeds, ECC error correction, or laptop SO-DIMM form factors. Systems requiring buffered or registered memory should look elsewhere.

Key spec: DDR2 PC4200 at CL4

The single specification that decides fitment is the DDR2 PC4200 (533) rating combined with CL4 latency at 1.8V. Your motherboard must explicitly support this exact speed grade and voltage for the module to function correctly. Verify the required part number against your board manual before purchase.

特長

  • 1GB desktop DDR2 module for legacy system upgrades
  • CL4 latency supports responsive operation at rated speed
  • PC4200 (533 MT/s) rating matches DDR2-533 motherboard specs
  • Unbuffered 240-pin DIMM fits standard desktop slots
  • 8 V operation aligns with DDR2 voltage requirements

仕様

Capacity1GB
CAS LatencyCL4

この商品に関する質問

Will my motherboard accept a 240-pin DDR2 DIMM running at 1.8 V?

This module uses the standard 240-pin DDR2 form factor and operates at 1.8 V, so any desktop board with DDR2 slots that support 1.8 V will accept it.

Can I run this CL4 PC2-4200 stick alongside slower CL5 DDR2 modules I already have?

Yes, the memory controller will down-clock all modules to the slowest speed and highest latency present, so CL5 sticks will force this CL4 kit to run at CL5 timings.

How can I confirm the module is detected at 533 MT/s with CL4 timings after installation?

Enter the BIOS or use a tool such as CPU-Z; the SPD tab should show PC2-4200, 533 MT/s and CL4-4-4-12 for this 1 GB DIMM.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。