暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Kingston Technology Corp.

Kingston Technology Corp. KCP426NS8/16 16GB DDR4 2666 desktop RAM

SKU CH-6T1F-SFGFW MPN KCP426NS8/16

A 16GB DDR4 2666 desktop module with CL19 latency, 1.20V operation and Intel XMP 2.0 support

  • Capacity16GB
  • Type288-Pin PC RAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity for demanding workloads
  • DDR4 2666 speed for responsive performance
  • CL19 latency for efficient data access
  • 20 V operation reduces power draw
  • Intel XMP 2.0 profile enables simple setup

Capacity and Speed

This Kingston desktop memory module provides 16GB of DDR4 2666 capacity in a single 288-pin stick. It operates at CL19 latency with a standard 1.20V voltage and supports Intel XMP 2.0 profiles for automatic configuration.

Suited for Standard DDR4 Builds

The unbuffered, non-ECC design fits mainstream desktop platforms that accept DDR4 2666 memory. Systems requiring registered or error-correcting modules, or those limited to lower DDR4 speeds, should look at alternatives.

Headroom for Everyday Workloads

The 16GB capacity handles multitasking, office applications and mainstream gaming without paging. Memory-intensive tasks such as large-scale video editing, virtualisation clusters or heavy rendering will exceed the available headroom.

特長

  • 16 GB capacity for demanding workloads
  • DDR4 2666 speed for responsive performance
  • CL19 latency for efficient data access
  • 20 V operation reduces power draw
  • Intel XMP 2.0 profile enables simple setup

仕様

BrandKingston
ModelKCP426NS8/16
Capacity16GB
Type288-Pin PC RAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
BIOS/Performance ProfileIntel XMP 2.0
Heat SpreaderNo
配送重量0.09 kg
梱包サイズ152 × 76 × 5 mm

この商品に関する質問

Do I need a motherboard with a 288-pin DDR4 slot and Intel XMP 2.0 support to use this 16GB module?

Yes, the module is a 288-pin DDR4 2666 DIMM rated at 1.20V with an Intel XMP 2.0 profile, so the board must provide a DDR4 slot and XMP capability to run at the advertised speed.

Will this CL19 DDR4 2666 module downclock to match slower DDR4 memory already installed?

The module will operate at the highest common speed supported by the memory controller; when paired with slower DDR4 DIMMs it will run at the lower frequency and the looser timing of the slowest stick.

How can I confirm the memory is running at DDR4 2666 with CL19 timings after installation?

Enter the BIOS or use a system-information utility to verify the active DRAM frequency shows 2666 MT/s and the CAS latency reads 19.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。