暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Kingston Technology Corp.

Kingston Technology Corp. KTD-PE426S8/8G 8GB ECC REG DDR4 2666MHz server RAM

SKU CH-46T5-S1XVY MPN KTD-PE426S8/8G

8 GB registered ECC DDR4 server module running at 2666 MHz for Dell PowerEdge and Precision workstations

  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on multi-module servers
  • 2666 MHz DDR4 speed matches platform specifications
  • Validated for Dell PowerEdge R640, R740, R740xd and R940 servers
  • Lifetime warranty reflects manufacturer confidence in reliability

Server memory for Dell systems

This 8 GB DDR4 module is built for Dell PowerEdge and Precision platforms that require registered ECC memory. It targets administrators upgrading or repairing qualified servers and workstations.

Registered ECC design for stable operation

The registered signal processing and error-correcting code reduce electrical load on the memory bus and correct single-bit errors automatically. This combination supports continuous uptime in multi-DIMM configurations.

2666 MHz speed rating

The module runs at 2666 MHz, so it will only operate at that frequency or at the highest speed the platform and memory controller negotiate. Systems requiring a different data rate cannot use this part.

特長

  • ECC protection prevents data corruption in critical workloads
  • Registered signal processing improves stability on multi-module servers
  • 2666 MHz DDR4 speed matches platform specifications
  • Validated for Dell PowerEdge R640, R740, R740xd and R940 servers
  • Lifetime warranty reflects manufacturer confidence in reliability

仕様

BrandKingston
配送重量0.45 kg
梱包サイズ25 × 25 × 25 mm

この商品に関する質問

What DDR4 speed does this 2666MHz module run at in a Dell PowerEdge R740?

The module operates at 2666 MHz DDR4; the platform's memory controller determines the final speed based on the processor installed and the number of DIMMs populated per channel.

Does this registered ECC DIMM fit the Dell Precision 7820 workstation memory slots?

Yes, the KTD-PE426S8/8G is listed as compatible with the Dell Precision 7820 workstation and uses the standard 288-pin RDIMM form factor for DDR4 server platforms.

What BIOS setting is often missed when installing this memory in a Dell PowerEdge R640?

After installing the modules, enter the BIOS and verify that the memory operating mode is set to Optimiser Mode or the desired redundancy mode, as the default may not match the new population.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。