OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Kingston Technology Corp.
2GB DDR3 1066 ECC server memory module with CL7 latency and 1.50V operation
This Kingston ValueRAM stick delivers 2GB of DDR3 memory at 1066 MT/s with ECC error correction. It uses a 240-pin form factor and runs at the standard 1.50V. The CL7 latency supports stable operation in compatible server platforms.
ECC circuitry detects and corrects single-bit errors during extended workloads, helping prevent data corruption in memory-intensive tasks. The module maintains its rated 1066 speed at CL7 timings without relying on burst performance. Constant voltage at 1.50V supports consistent signal integrity over long periods.
Error-correcting code is the single specification that determines whether this part matches the system requirement. Boards that require ECC will accept this module; those that do not support ECC cannot use its error-correction capability. Verify the platform documentation for ECC compatibility before purchase.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR1066D3E7S/2G |
| Capacity | 2GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| 配送重量 | 0.05 kg |
| 梱包サイズ | 171 × 57 × 13 mm |
At 1.50 volts the module operates within standard DDR3 power limits for 1066 speed, so heat output stays low even under 24/7 server workloads.
You need a server board with a 240-pin DDR3 DIMM slot that supports ECC and 1066 (PC3 8500) speed.
No, the module requires ECC support; a non-ECC platform will not recognise it.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?